US Bridges

Melbourne RD over Walker Branch

Fair

Tarrant County, Texas · 300 Ft N of Pipeline RD · Structure no. 022200E02740002

Built
1968
57 years old
Condition
Fair
inspected July 2024
Type
Stringer/Multi-beam or Girder
Concrete
Length
64 ft
2 main spans
Daily traffic
7,266
2024 count
Owner
City
City or Municipal Highway Agency

About this bridge

Melbourne RD over Walker Branch is a concrete stringer/multi-beam or girder carrying Melbourne RD over Walker Branch in Tarrant County, Texas. It was built in 1968, so it is 57 years old, older than the Texas average of 44.4 years.

The most recent inspection reported to the Federal Highway Administration rates it in fair condition with a lowest component rating of 6 out of 9. The lowest-rated primary component is rated 5 or 6. Minor deterioration is present but the structure is sound.

It carries about 7,266 vehicles a day, roughly 3% of them trucks, projected to reach 8,830 by 2039. The structure is 64 ft (19.6 m) long and 52 ft wide. If it were closed, the detour would be 1.2 mi (2 km).

CarriesMelbourne RD
CrossesWalker Branch
Location300 Ft N of Pipeline RD
RouteCity Street 0
StateTexas
Coordinates32.82483, -97.19873
Functional classUrban Collector

Condition and inspection

Fair

The lowest-rated primary component is rated 5 or 6. Minor deterioration is present but the structure is sound.

ComponentRatingMeaning
Deck6 SatisfactoryStructural elements show some minor deterioration.
Superstructure6 SatisfactoryStructural elements show some minor deterioration.
Substructure7 GoodSome minor problems.
Channel and channel protection7 GoodSome minor problems.
Last inspectionJuly 2024
Inspection intervalevery 24 months
Operating statusOpen, no restriction
ScourFoundations stable; scour above top of footing
Structural evaluation6: Equal to present minimum criteria
Deck geometry2: Basically intolerable, requiring high priority of replacement
Waterway adequacy6: Equal to present minimum criteria
Approach roadway alignment8: Equal to present desirable criteria
Operating rating36 US tons
Inventory rating27 US tons

Structure

MaterialConcrete
DeckConcrete, cast-in-place
Main spans2
Design loadUnknown
Structure length64 ft (19.6 m)
Longest span32 ft (9.8 m)
Deck width52 ft (15.9 m)
Roadway width44 ft (13.4 m)
Vertical clearance over deckUnrestricted

Traffic and service

Average daily traffic7,266 (2024)
Projected traffic8,830 by 2039
Trucks3%
Lanes on structure4
Traffic directionTwo-way traffic
CarriesHighway
CrossesWaterway
Detour if closed1.2 mi (2 km)
TollOn a free road
National Highway SystemNo

Ownership and planned work

OwnerCity or Municipal Highway Agency
Maintained byCity or Municipal Highway Agency
Historic statusPossibly eligible for the National Register; requires further investigation
Work proposedOther structural work, including hydraulic replacements
Estimated improvement cost$126,000
NavigationNo navigation control on waterway

Frequently asked questions

When was Melbourne RD over Walker Branch built?

It was built in 1968, making it 57 years old in 2025.

What condition is Melbourne RD over Walker Branch in?

The National Bridge Inventory rates it in fair condition. The lowest-rated primary component is rated 5 or 6. Minor deterioration is present but the structure is sound. The last reported inspection was in July 2024.

How much traffic does Melbourne RD over Walker Branch carry?

About 7,266 vehicles per day (2024 count), of which roughly 3% are trucks.

How long is Melbourne RD over Walker Branch?

The structure is 64 ft (19.6 m) long with a longest span of 32 ft (9.8 m) and a deck 52 ft wide.

Who owns Melbourne RD over Walker Branch?

It is owned by the City or Municipal Highway Agency.