US Bridges

Duncanville RD over Stewart Branch

Good

Dallas County, Texas · 0.5 MI S of HWY 67 · Structure no. 180570S00210005

Built
2022
3 years old
Condition
Good
inspected June 2024
Type
Culvert
Concrete
Length
45 ft
4 main spans
Daily traffic
4,567
2019 count
Owner
City
City or Municipal Highway Agency

About this bridge

Duncanville RD over Stewart Branch is a concrete culvert carrying Duncanville RD over Stewart Branch in Dallas County, Texas. It was built in 2022, so it is 3 years old, younger than the Texas average of 44.4 years.

The most recent inspection reported to the Federal Highway Administration rates it in good condition with a lowest component rating of 7 out of 9. All primary components (deck, superstructure, substructure, or culvert) are rated 7 or higher. No significant problems were noted.

It carries about 4,567 vehicles a day, roughly 3% of them trucks, projected to reach 12,789 by 2040. The structure is 45 ft (13.6 m) long. If it were closed, the detour would be 1.9 mi (3 km).

Location

Open in Google Maps
CarriesDuncanville RD
CrossesStewart Branch
Location0.5 MI S of HWY 67
RouteCity Street 0
CountyDallas County
StateTexas
Coordinates32.61749, -96.90839
Functional classUrban Minor Arterial

Condition and inspection

Good

All primary components (deck, superstructure, substructure, or culvert) are rated 7 or higher. No significant problems were noted.

ComponentRatingMeaning
Channel and channel protection7 GoodSome minor problems.
Culvert7 GoodSome minor problems.
Last inspectionJune 2024
Inspection intervalevery 24 months
Operating statusOpen, no restriction
ScourFoundations stable; scour above top of footing
Structural evaluation7: Better than present minimum criteria
Waterway adequacy8: Equal to present desirable criteria
Approach roadway alignment8: Equal to present desirable criteria
Operating rating60 US tons
Inventory rating36 US tons

Structure

Structure typeCulvert
MaterialConcrete
DeckNot applicable
Main spans4
Design loadHL 93
Structure length45 ft (13.6 m)
Longest span10 ft (3 m)
Deck width0 ft (0 m)
Roadway width0 ft (0 m)
Vertical clearance over deckUnrestricted

Traffic and service

Average daily traffic4,567 (2019)
Projected traffic12,789 by 2040
Trucks3%
Lanes on structure4
Traffic directionTwo-way traffic
CarriesHighway
CrossesWaterway
Detour if closed1.9 mi (3 km)
TollOn a free road
National Highway SystemNo

Ownership and planned work

OwnerCity or Municipal Highway Agency
Maintained byCity or Municipal Highway Agency
Historic statusNot eligible for the National Register of Historic Places
Work proposedNone recorded
Estimated improvement cost—
NavigationNo navigation control on waterway

Frequently asked questions

When was Duncanville RD over Stewart Branch built?

It was built in 2022, making it 3 years old in 2025.

What condition is Duncanville RD over Stewart Branch in?

The National Bridge Inventory rates it in good condition. All primary components (deck, superstructure, substructure, or culvert) are rated 7 or higher. No significant problems were noted. The last reported inspection was in June 2024.

How much traffic does Duncanville RD over Stewart Branch carry?

About 4,567 vehicles per day (2019 count), of which roughly 3% are trucks.

How long is Duncanville RD over Stewart Branch?

The structure is 45 ft (13.6 m) long with a longest span of 10 ft (3 m).

Who owns Duncanville RD over Stewart Branch?

It is owned by the City or Municipal Highway Agency.