US Bridges

RTE I190 over Kenmore Ave CSX

Good

Erie County, New York · 0.9 M S JCT Rts I190 <324 · Structure no. 000000005512699

Built
1999
26 years old
Condition
Good
inspected June 2023
Type
Stringer/Multi-beam or Girder
Steel Continuous
Length
290 ft
3 main spans
Daily traffic
64,190
2012 count
Owner
Toll Authority
State Toll Authority

About this bridge

RTE I190 over Kenmore Ave CSX is a steel continuous stringer/multi-beam or girder carrying RTE I190 over Kenmore Ave CSX in Erie County, New York. It was built in 1999, so it is 26 years old, younger than the New York average of 53 years.

The most recent inspection reported to the Federal Highway Administration rates it in good condition with a lowest component rating of 7 out of 9. All primary components (deck, superstructure, substructure, or culvert) are rated 7 or higher. No significant problems were noted.

It carries about 64,190 vehicles a day, roughly 10% of them trucks, projected to reach 71,937 by 2041. The structure is 290 ft (88.4 m) long and 99 ft wide. If it were closed, the detour would be 0.6 mi (1 km).

Location

Open in Google Maps
CarriesRTE I190
CrossesKenmore Ave CSX
Location0.9 M S JCT Rts I190 <324
RouteInterstate 190
CountyErie County
StateNew York
Coordinates42.97553, -78.91101
Functional classUrban Principal Arterial - Interstate

Condition and inspection

Good

All primary components (deck, superstructure, substructure, or culvert) are rated 7 or higher. No significant problems were noted.

ComponentRatingMeaning
Deck8 Very GoodNo problems noted.
Superstructure9 ExcellentNo problems noted.
Substructure7 GoodSome minor problems.
Last inspectionJune 2023
Inspection intervalevery 24 months
Operating statusOpen, no restriction
ScourBridge not over waterway
Structural evaluation6: Equal to present minimum criteria
Deck geometry9: Superior to present desirable criteria
Approach roadway alignment8: Equal to present desirable criteria
Operating rating38.9 US tons
Inventory rating30 US tons

Structure

Structure typeStringer/Multi-beam or Girder
MaterialSteel Continuous
DeckConcrete, cast-in-place
Main spans3
Design loadHS 25 or greater
Structure length290 ft (88.4 m)
Longest span108 ft (32.9 m)
Deck width99 ft (30.1 m)
Roadway width92 ft (28 m)
Vertical clearance over deckUnrestricted

Traffic and service

Average daily traffic64,190 (2012)
Projected traffic71,937 by 2041
Trucks10%
Lanes on structure4
Traffic directionTwo-way traffic
CarriesHighway
CrossesHighway and railroad
Detour if closed0.6 mi (1 km)
TollOn a free road
National Highway SystemYes
Strategic Highway NetworkInterstate STRAHNET route

Ownership and planned work

OwnerState Toll Authority
Maintained byState Toll Authority
Historic statusNot eligible for the National Register of Historic Places
Work proposedWidening with deck rehabilitation or replacement
Estimated improvement cost$18.6 million (2024 estimate)
NavigationNot applicable (no waterway)

Frequently asked questions

When was RTE I190 over Kenmore Ave CSX built?

It was built in 1999, making it 26 years old in 2025.

What condition is RTE I190 over Kenmore Ave CSX in?

The National Bridge Inventory rates it in good condition. All primary components (deck, superstructure, substructure, or culvert) are rated 7 or higher. No significant problems were noted. The last reported inspection was in June 2023.

How much traffic does RTE I190 over Kenmore Ave CSX carry?

About 64,190 vehicles per day (2012 count), of which roughly 10% are trucks.

How long is RTE I190 over Kenmore Ave CSX?

The structure is 290 ft (88.4 m) long with a longest span of 108 ft (32.9 m) and a deck 99 ft wide.

Who owns RTE I190 over Kenmore Ave CSX?

It is owned by the State Toll Authority.