SR1820 over Conner Mill Branch
GoodHaywood County, North Carolina · 0.1 Mi. N. Jct. SR1819 · Structure no. 000000000870321
- Built
- 2015
- 10 years old
- Condition
- Good
- inspected December 2021
- Type
- Culvert
- Concrete Continuous
- Length
- 23 ft
- 2 main spans
- Daily traffic
- 440
- 2016 count
- Owner
- State
- State Highway Agency
About this bridge
SR1820 over Conner Mill Branch is a concrete continuous culvert carrying SR1820 over Conner Mill Branch in Haywood County, North Carolina. It was built in 2015, so it is 10 years old, younger than the North Carolina average of 38.7 years.
The most recent inspection reported to the Federal Highway Administration rates it in good condition with a lowest component rating of 8 out of 9. All primary components (deck, superstructure, substructure, or culvert) are rated 7 or higher. No significant problems were noted.
It carries about 440 vehicles a day, roughly 7% of them trucks, projected to reach 880 by 2040. The structure is 23 ft (7 m) long. If it were closed, the detour would be 0.6 mi (1 km).
Location
Open in Google MapsCondition and inspection
All primary components (deck, superstructure, substructure, or culvert) are rated 7 or higher. No significant problems were noted.
| Component | Rating | Meaning |
|---|---|---|
| Channel and channel protection | 7 Good | Some minor problems. |
| Culvert | 8 Very Good | No problems noted. |
Structure
Traffic and service
Ownership and planned work
Frequently asked questions
When was SR1820 over Conner Mill Branch built?
It was built in 2015, making it 10 years old in 2025.
What condition is SR1820 over Conner Mill Branch in?
The National Bridge Inventory rates it in good condition. All primary components (deck, superstructure, substructure, or culvert) are rated 7 or higher. No significant problems were noted. The last reported inspection was in December 2021.
How much traffic does SR1820 over Conner Mill Branch carry?
About 440 vehicles per day (2016 count), of which roughly 7% are trucks.
How long is SR1820 over Conner Mill Branch?
The structure is 23 ft (7 m) long with a longest span of 9 ft (2.7 m).
Who owns SR1820 over Conner Mill Branch?
It is owned by the State Highway Agency.