BIA Route 1102 over Wa-Atch River
GoodClallam County, Washington · 3 KM SW of Neah Bay · Structure no. 00000000000P082
- Built
- 2010
- 15 years old
- Condition
- Good
- inspected August 2024
- Type
- Stringer/Multi-beam or Girder
- Prestressed Concrete
- Length
- 189 ft
- 3 main spans
- Daily traffic
- 300
- 2021 count
- Owner
- Federal
- Bureau of Indian Affairs
About this bridge
BIA Route 1102 over Wa-Atch River is a prestressed concrete stringer/multi-beam or girder carrying BIA Route 1102 over Wa-Atch River in Clallam County, Washington. It was built in 2010, so it is 15 years old, younger than the Washington average of 49.8 years.
The most recent inspection reported to the Federal Highway Administration rates it in good condition with a lowest component rating of 7 out of 9. All primary components (deck, superstructure, substructure, or culvert) are rated 7 or higher. No significant problems were noted.
It carries about 300 vehicles a day, roughly 5% of them trucks, projected to reach 334 by 2040. The structure is 189 ft (57.6 m) long and 43 ft wide. If it were closed, the detour would be 1.2 mi (2 km).
Location
Open in Google MapsCondition and inspection
All primary components (deck, superstructure, substructure, or culvert) are rated 7 or higher. No significant problems were noted.
| Component | Rating | Meaning |
|---|---|---|
| Deck | 7 Good | Some minor problems. |
| Superstructure | 7 Good | Some minor problems. |
| Substructure | 8 Very Good | No problems noted. |
| Channel and channel protection | 7 Good | Some minor problems. |
Structure
Traffic and service
Ownership and planned work
Frequently asked questions
When was BIA Route 1102 over Wa-Atch River built?
It was built in 2010, making it 15 years old in 2025.
What condition is BIA Route 1102 over Wa-Atch River in?
The National Bridge Inventory rates it in good condition. All primary components (deck, superstructure, substructure, or culvert) are rated 7 or higher. No significant problems were noted. The last reported inspection was in August 2024.
How much traffic does BIA Route 1102 over Wa-Atch River carry?
About 300 vehicles per day (2021 count), of which roughly 5% are trucks.
How long is BIA Route 1102 over Wa-Atch River?
The structure is 189 ft (57.6 m) long with a longest span of 60 ft (18.4 m) and a deck 43 ft wide.
Who owns BIA Route 1102 over Wa-Atch River?
It is owned by the Bureau of Indian Affairs.