US Bridges

C30WI over Stevens Branch

Good

Washington County, Vermont · @ JCT W1 US302 · Structure no. 101201001212011

Built
2000
25 years old
Condition
Good
inspected August 2024
Type
Stringer/Multi-beam or Girder
Steel
Length
73 ft
1 main span
Daily traffic
1,380
2019 count
Owner
City
City or Municipal Highway Agency

About this bridge

C30WI over Stevens Branch is a steel stringer/multi-beam or girder carrying C30WI over Stevens Branch in Washington County, Vermont. It was built in 2000, so it is 25 years old, younger than the Vermont average of 60.8 years.

The most recent inspection reported to the Federal Highway Administration rates it in good condition with a lowest component rating of 8 out of 9. All primary components (deck, superstructure, substructure, or culvert) are rated 7 or higher. No significant problems were noted.

It carries about 1,380 vehicles a day, roughly 25% of them trucks, projected to reach 1,449 by 2029. The structure is 73 ft (22.3 m) long and 41 ft wide. If it were closed, the detour would be 98.8 mi (159 km).

Location

Open in Google Maps
CarriesC30WI
CrossesStevens Branch
Location@ JCT W1 US302
CountyWashington County
StateVermont
Coordinates44.20972, -72.51545
Functional classUrban Local

Condition and inspection

Good

All primary components (deck, superstructure, substructure, or culvert) are rated 7 or higher. No significant problems were noted.

ComponentRatingMeaning
Deck8 Very GoodNo problems noted.
Superstructure8 Very GoodNo problems noted.
Substructure8 Very GoodNo problems noted.
Channel and channel protection8 Very GoodNo problems noted.
Last inspectionAugust 2024
Inspection intervalevery 24 months
Operating statusOpen, no restriction
ScourFoundations stable; scour above top of footing
Structural evaluation8: Equal to present desirable criteria
Deck geometry5: Somewhat better than minimum adequacy to tolerate being left in place as is
Waterway adequacy7: Better than present minimum criteria
Approach roadway alignment8: Equal to present desirable criteria
Operating rating61 US tons
Inventory rating45 US tons

Structure

Structure typeStringer/Multi-beam or Girder
MaterialSteel
DeckConcrete, cast-in-place
Main spans1
Design loadHS 25 or greater
Structure length73 ft (22.3 m)
Longest span71 ft (21.6 m)
Deck width41 ft (12.4 m)
Roadway width32 ft (9.8 m)
Vertical clearance over deckUnrestricted

Traffic and service

Average daily traffic1,380 (2019)
Projected traffic1,449 by 2029
Trucks25%
Lanes on structure2
Traffic directionTwo-way traffic
CarriesHighway and pedestrian
CrossesWaterway
Detour if closed98.8 mi (159 km)
TollOn a free road
National Highway SystemNo

Ownership and planned work

OwnerCity or Municipal Highway Agency
Maintained byCity or Municipal Highway Agency
Historic statusNot eligible for the National Register of Historic Places
Work proposedNone recorded
Estimated improvement cost—
NavigationNo navigation control on waterway

Frequently asked questions

When was C30WI over Stevens Branch built?

It was built in 2000, making it 25 years old in 2025.

What condition is C30WI over Stevens Branch in?

The National Bridge Inventory rates it in good condition. All primary components (deck, superstructure, substructure, or culvert) are rated 7 or higher. No significant problems were noted. The last reported inspection was in August 2024.

How much traffic does C30WI over Stevens Branch carry?

About 1,380 vehicles per day (2019 count), of which roughly 25% are trucks.

How long is C30WI over Stevens Branch?

The structure is 73 ft (22.3 m) long with a longest span of 71 ft (21.6 m) and a deck 41 ft wide.

Who owns C30WI over Stevens Branch?

It is owned by the City or Municipal Highway Agency.