US Bridges

Etna Mills Rd. over Mill Pond Creek

Fair

King William County, Virginia · 0.9M RTE.601-0.9M RTE.615 · Structure no. 000000000027942

Built
1996
29 years old
Condition
Fair
inspected March 2024
Type
Culvert
Concrete
Length
25 ft
3 main spans
Daily traffic
680
2022 count
Owner
State
State Highway Agency

About this bridge

Etna Mills Rd. over Mill Pond Creek is a concrete culvert carrying Etna Mills Rd. over Mill Pond Creek in King William County, Virginia. It was built in 1996, so it is 29 years old, younger than the Virginia average of 50.7 years.

The most recent inspection reported to the Federal Highway Administration rates it in fair condition with a lowest component rating of 6 out of 9. The lowest-rated primary component is rated 5 or 6. Minor deterioration is present but the structure is sound.

It carries about 680 vehicles a day, projected to reach 993 by 2042. The structure is 25 ft (7.6 m) long. If it were closed, the detour would be 8.1 mi (13 km).

Location

Open in Google Maps
CarriesEtna Mills Rd.
CrossesMill Pond Creek
Location0.9M RTE.601-0.9M RTE.615
RouteCounty Highway 614
CountyKing William County
StateVirginia
Coordinates37.76803, -77.2838
Functional classRural Major Collector

Condition and inspection

Fair

The lowest-rated primary component is rated 5 or 6. Minor deterioration is present but the structure is sound.

ComponentRatingMeaning
Channel and channel protection5 FairAll primary structural elements are sound but may have minor section loss, cracking, spalling or scour.
Culvert6 SatisfactoryStructural elements show some minor deterioration.
Last inspectionMarch 2024
Inspection intervalevery 24 months
Operating statusOpen, no restriction
ScourFoundations stable; scour within limits of footing or piles
Structural evaluation6: Equal to present minimum criteria
Waterway adequacy8: Equal to present desirable criteria
Approach roadway alignment6: Equal to present minimum criteria
Operating rating99 US tons
Inventory rating99 US tons

Structure

Structure typeCulvert
MaterialConcrete
DeckNot applicable
Main spans3
Design loadHS 20
Structure length25 ft (7.6 m)
Longest span8 ft (2.4 m)
Deck width0 ft (0 m)
Roadway width0 ft (0 m)
Vertical clearance over deckUnrestricted

Traffic and service

Average daily traffic680 (2022)
Projected traffic993 by 2042
Trucks0%
Lanes on structure2
Traffic directionTwo-way traffic
CarriesHighway
CrossesWaterway
Detour if closed8.1 mi (13 km)
TollOn a free road
National Highway SystemNo

Ownership and planned work

OwnerState Highway Agency
Maintained byState Highway Agency
Historic statusNot eligible for the National Register of Historic Places
Work proposedNone recorded
Estimated improvement cost—
NavigationNo navigation control on waterway

Frequently asked questions

When was Etna Mills Rd. over Mill Pond Creek built?

It was built in 1996, making it 29 years old in 2025.

What condition is Etna Mills Rd. over Mill Pond Creek in?

The National Bridge Inventory rates it in fair condition. The lowest-rated primary component is rated 5 or 6. Minor deterioration is present but the structure is sound. The last reported inspection was in March 2024.

How much traffic does Etna Mills Rd. over Mill Pond Creek carry?

About 680 vehicles per day (2022 count).

How long is Etna Mills Rd. over Mill Pond Creek?

The structure is 25 ft (7.6 m) long with a longest span of 8 ft (2.4 m).

Who owns Etna Mills Rd. over Mill Pond Creek?

It is owned by the State Highway Agency.