Bilbrook Place over Slaughter Creek Branch
GoodTravis County, Texas · 0.60 MI S of Slaughter LN · Structure no. 142270B05900001
- Built
- 1988
- 37 years old
- Condition
- Good
- inspected March 2024
- Type
- Stringer/Multi-beam or Girder
- Prestressed Concrete
- Length
- 102 ft
- 1 main span
- Daily traffic
- 6,550
- 2010 count
- Owner
- City
- City or Municipal Highway Agency
About this bridge
Bilbrook Place over Slaughter Creek Branch is a prestressed concrete stringer/multi-beam or girder carrying Bilbrook Place over Slaughter Creek Branch in Travis County, Texas. It was built in 1988, so it is 37 years old, younger than the Texas average of 44.4 years.
The most recent inspection reported to the Federal Highway Administration rates it in good condition with a lowest component rating of 7 out of 9. All primary components (deck, superstructure, substructure, or culvert) are rated 7 or higher. No significant problems were noted.
It carries about 6,550 vehicles a day, projected to reach 8,000 by 2030. The structure is 102 ft (31.1 m) long and 58 ft wide. If it were closed, the detour would be 1.9 mi (3 km).
Location
Open in Google MapsCondition and inspection
All primary components (deck, superstructure, substructure, or culvert) are rated 7 or higher. No significant problems were noted.
| Component | Rating | Meaning |
|---|---|---|
| Deck | 7 Good | Some minor problems. |
| Superstructure | 7 Good | Some minor problems. |
| Substructure | 7 Good | Some minor problems. |
| Channel and channel protection | 6 Satisfactory | Structural elements show some minor deterioration. |
Structure
Traffic and service
Ownership and planned work
Frequently asked questions
When was Bilbrook Place over Slaughter Creek Branch built?
It was built in 1988, making it 37 years old in 2025.
What condition is Bilbrook Place over Slaughter Creek Branch in?
The National Bridge Inventory rates it in good condition. All primary components (deck, superstructure, substructure, or culvert) are rated 7 or higher. No significant problems were noted. The last reported inspection was in March 2024.
How much traffic does Bilbrook Place over Slaughter Creek Branch carry?
About 6,550 vehicles per day (2010 count).
How long is Bilbrook Place over Slaughter Creek Branch?
The structure is 102 ft (31.1 m) long with a longest span of 99 ft (30.2 m) and a deck 58 ft wide.
Who owns Bilbrook Place over Slaughter Creek Branch?
It is owned by the City or Municipal Highway Agency.