US Bridges

SR 1003 over Wallis Run

Good

Lycoming County, Pennsylvania · 2 MI SE of Calvert · Structure no. 000000000024809

Built
1938
87 years old, rebuilt 2013
Condition
Good
inspected April 2024
Type
Stringer/Multi-beam or Girder
Steel
Length
67 ft
1 main span
Daily traffic
628
2024 count
Owner
State
State Highway Agency

About this bridge

SR 1003 over Wallis Run is a steel stringer/multi-beam or girder carrying SR 1003 over Wallis Run in Lycoming County, Pennsylvania. It was built in 1938 and reconstructed in 2013, so it is 87 years old, older than the Pennsylvania average of 54.8 years.

The most recent inspection reported to the Federal Highway Administration rates it in good condition with a lowest component rating of 7 out of 9. All primary components (deck, superstructure, substructure, or culvert) are rated 7 or higher. No significant problems were noted.

It carries about 628 vehicles a day, roughly 20% of them trucks, projected to reach 881 by 2032. The structure is 67 ft (20.4 m) long and 28 ft wide. If it were closed, the detour would be 24.2 mi (39 km).

Location

Open in Google Maps
CarriesSR 1003
CrossesWallis Run
Location2 MI SE of Calvert
RouteState Highway 0
CountyLycoming County
StatePennsylvania
Coordinates41.39388, -76.92967
Functional classRural Minor Collector

Condition and inspection

Good

All primary components (deck, superstructure, substructure, or culvert) are rated 7 or higher. No significant problems were noted.

ComponentRatingMeaning
Deck8 Very GoodNo problems noted.
Superstructure8 Very GoodNo problems noted.
Substructure7 GoodSome minor problems.
Channel and channel protection7 GoodSome minor problems.
Last inspectionApril 2024
Inspection intervalevery 24 months
Operating statusOpen, no restriction
ScourFoundations stable; action required to protect exposed foundations
Structural evaluation7: Better than present minimum criteria
Deck geometry4: Meets minimum tolerable limits to be left in place as is
Waterway adequacy9: Superior to present desirable criteria
Approach roadway alignment6: Equal to present minimum criteria
Operating rating64.3 US tons
Inventory rating49.6 US tons

Structure

Structure typeStringer/Multi-beam or Girder
MaterialSteel
DeckConcrete, cast-in-place
Main spans1
Design loadHL 93
Structure length67 ft (20.4 m)
Longest span63 ft (19.2 m)
Deck width28 ft (8.5 m)
Roadway width26 ft (7.8 m)
Vertical clearance over deckUnrestricted

Traffic and service

Average daily traffic628 (2024)
Projected traffic881 by 2032
Trucks20%
Lanes on structure2
Traffic directionTwo-way traffic
CarriesHighway
CrossesWaterway
Detour if closed24.2 mi (39 km)
TollOn a free road
National Highway SystemNo

Ownership and planned work

OwnerState Highway Agency
Maintained byState Highway Agency
Historic statusNot eligible for the National Register of Historic Places
Work proposedRehabilitation because of general structure deterioration or inadequate strength
Estimated improvement cost$226,000
NavigationNo navigation control on waterway

Frequently asked questions

When was SR 1003 over Wallis Run built?

It was built in 1938, making it 87 years old in 2025. It was reconstructed in 2013.

What condition is SR 1003 over Wallis Run in?

The National Bridge Inventory rates it in good condition. All primary components (deck, superstructure, substructure, or culvert) are rated 7 or higher. No significant problems were noted. The last reported inspection was in April 2024.

How much traffic does SR 1003 over Wallis Run carry?

About 628 vehicles per day (2024 count), of which roughly 20% are trucks.

How long is SR 1003 over Wallis Run?

The structure is 67 ft (20.4 m) long with a longest span of 63 ft (19.2 m) and a deck 28 ft wide.

Who owns SR 1003 over Wallis Run?

It is owned by the State Highway Agency.