US Bridges

E. Hines Hill RD over Brandywine Creek

Fair

Summit County, Ohio · 100 Ft W Walters RD · Structure no. 7740085

Built
1950
75 years old
Condition
Fair
inspected February 2024
Type
Slab
Concrete
Length
32 ft
1 main span
Daily traffic
6,920
2018 count
Owner
County
County Highway Agency

About this bridge

E. Hines Hill RD over Brandywine Creek is a concrete slab carrying E. Hines Hill RD over Brandywine Creek in Summit County, Ohio. It was built in 1950, so it is 75 years old, older than the Ohio average of 47.3 years.

The most recent inspection reported to the Federal Highway Administration rates it in fair condition with a lowest component rating of 5 out of 9. The lowest-rated primary component is rated 5 or 6. Minor deterioration is present but the structure is sound.

It carries about 6,920 vehicles a day, roughly 1% of them trucks, projected to reach 9,605 by 2038. The structure is 32 ft (9.8 m) long and 32 ft wide. If it were closed, the detour would be 3.1 mi (5 km).

CarriesE. Hines Hill RD
CrossesBrandywine Creek
Location100 Ft W Walters RD
RouteCity Street 2228
StateOhio
Coordinates41.26028, -81.48919
Functional classUrban Collector

Condition and inspection

Fair

The lowest-rated primary component is rated 5 or 6. Minor deterioration is present but the structure is sound.

ComponentRatingMeaning
Deck5 FairAll primary structural elements are sound but may have minor section loss, cracking, spalling or scour.
Superstructure5 FairAll primary structural elements are sound but may have minor section loss, cracking, spalling or scour.
Substructure5 FairAll primary structural elements are sound but may have minor section loss, cracking, spalling or scour.
Channel and channel protection6 SatisfactoryStructural elements show some minor deterioration.
Last inspectionFebruary 2024
Inspection intervalevery 12 months
Operating statusOpen, no restriction
ScourFoundations stable; scour within limits of footing or piles
Structural evaluation5: Somewhat better than minimum adequacy to tolerate being left in place as is
Deck geometry3: Basically intolerable, requiring high priority of corrective action
Waterway adequacy7: Better than present minimum criteria
Approach roadway alignment8: Equal to present desirable criteria
Operating rating46.4 US tons
Inventory rating28.5 US tons

Structure

Structure typeSlab
MaterialConcrete
DeckConcrete, cast-in-place
Main spans1
Design loadH 15
Structure length32 ft (9.8 m)
Longest span31 ft (9.5 m)
Deck width32 ft (9.9 m)
Roadway width31 ft (9.3 m)
Vertical clearance over deckUnrestricted

Traffic and service

Average daily traffic6,920 (2018)
Projected traffic9,605 by 2038
Trucks1%
Lanes on structure2
Traffic directionTwo-way traffic
CarriesHighway
CrossesWaterway
Detour if closed3.1 mi (5 km)
TollOn a free road
National Highway SystemNo

Ownership and planned work

OwnerCounty Highway Agency
Maintained byCounty Highway Agency
Historic statusNot eligible for the National Register of Historic Places
Work proposedNone recorded
Estimated improvement cost—
NavigationNo navigation control on waterway

Frequently asked questions

When was E. Hines Hill RD over Brandywine Creek built?

It was built in 1950, making it 75 years old in 2025.

What condition is E. Hines Hill RD over Brandywine Creek in?

The National Bridge Inventory rates it in fair condition. The lowest-rated primary component is rated 5 or 6. Minor deterioration is present but the structure is sound. The last reported inspection was in February 2024.

How much traffic does E. Hines Hill RD over Brandywine Creek carry?

About 6,920 vehicles per day (2018 count), of which roughly 1% are trucks.

How long is E. Hines Hill RD over Brandywine Creek?

The structure is 32 ft (9.8 m) long with a longest span of 31 ft (9.5 m) and a deck 32 ft wide.

Who owns E. Hines Hill RD over Brandywine Creek?

It is owned by the County Highway Agency.