US Bridges

RTE 208 over Platte Kill

Poor

Ulster County, New York · 1.9 MI S JCT SH208 &SH299 · Structure no. 000000001040630

Built
1993
32 years old
Condition
Poor
inspected August 2023
Type
Box Beam or Girders - Multiple
Prestressed Concrete
Length
90 ft
1 main span
Daily traffic
5,521
2021 count
Owner
State
State Highway Agency

About this bridge

RTE 208 over Platte Kill is a prestressed concrete box beam or girders - multiple carrying RTE 208 over Platte Kill in Ulster County, New York. It was built in 1993, so it is 32 years old, younger than the New York average of 53 years.

The most recent inspection reported to the Federal Highway Administration rates it in poor condition with a lowest component rating of 4 out of 9. The lowest-rated primary component is rated 4 or below, indicating advanced deterioration. Poor does not mean unsafe; such bridges are inspected more often and may carry load restrictions.

It carries about 5,521 vehicles a day, roughly 8% of them trucks, projected to reach 6,706 by 2041. The structure is 90 ft (27.4 m) long and 36 ft wide. If it were closed, the detour would be 11.8 mi (19 km).

CarriesRTE 208
CrossesPlatte Kill
Location1.9 MI S JCT SH208 &SH299
RouteState Highway 208
Coordinates41.72531, -74.10477
Functional classUrban Minor Arterial

Condition and inspection

Poor

The lowest-rated primary component is rated 4 or below, indicating advanced deterioration. Poor does not mean unsafe; such bridges are inspected more often and may carry load restrictions.

ComponentRatingMeaning
Deck5 FairAll primary structural elements are sound but may have minor section loss, cracking, spalling or scour.
Superstructure4 PoorAdvanced section loss, deterioration, spalling or scour.
Substructure6 SatisfactoryStructural elements show some minor deterioration.
Channel and channel protection7 GoodSome minor problems.
Last inspectionAugust 2023
Inspection intervalevery 24 months
Operating statusOpen, no restriction
ScourFoundations stable; scour within limits of footing or piles
Structural evaluation4: Meets minimum tolerable limits to be left in place as is
Deck geometry4: Meets minimum tolerable limits to be left in place as is
Waterway adequacy4: Meets minimum tolerable limits to be left in place as is
Approach roadway alignment8: Equal to present desirable criteria
Operating rating75 US tons
Inventory rating29 US tons

Structure

MaterialPrestressed Concrete
DeckConcrete, cast-in-place
Main spans1
Design loadHS 20
Structure length90 ft (27.4 m)
Longest span85 ft (25.9 m)
Deck width36 ft (11.1 m)
Roadway width34 ft (10.5 m)
Vertical clearance over deckUnrestricted

Traffic and service

Average daily traffic5,521 (2021)
Projected traffic6,706 by 2041
Trucks8%
Lanes on structure2
Traffic directionTwo-way traffic
CarriesHighway
CrossesWaterway
Detour if closed11.8 mi (19 km)
TollOn a free road
National Highway SystemNo

Ownership and planned work

OwnerState Highway Agency
Maintained byState Highway Agency
Historic statusNot eligible for the National Register of Historic Places
Work proposedDeck replacement with only incidental widening
Estimated improvement cost$1.5 million (2024 estimate)
NavigationNo navigation control on waterway

Frequently asked questions

When was RTE 208 over Platte Kill built?

It was built in 1993, making it 32 years old in 2025.

What condition is RTE 208 over Platte Kill in?

The National Bridge Inventory rates it in poor condition. The lowest-rated primary component is rated 4 or below, indicating advanced deterioration. Poor does not mean unsafe; such bridges are inspected more often and may carry load restrictions. The last reported inspection was in August 2023.

How much traffic does RTE 208 over Platte Kill carry?

About 5,521 vehicles per day (2021 count), of which roughly 8% are trucks.

How long is RTE 208 over Platte Kill?

The structure is 90 ft (27.4 m) long with a longest span of 85 ft (25.9 m) and a deck 36 ft wide.

Who owns RTE 208 over Platte Kill?

It is owned by the State Highway Agency.