US Bridges

Buffalo Hollow RD over Willoughby Brook

Fair

Hunterdon County, New Jersey · 1.2 MI NE of Nj 31 JCT · Structure no. 1000084

Built
1900
125 years old, rebuilt 1990
Condition
Fair
inspected April 2023
Type
Stringer/Multi-beam or Girder
Steel
Length
22 ft
1 main span
Daily traffic
573
2023 count
Owner
County
County Highway Agency

About this bridge

Buffalo Hollow RD over Willoughby Brook is a steel stringer/multi-beam or girder carrying Buffalo Hollow RD over Willoughby Brook in Hunterdon County, New Jersey. It was built in 1900 and reconstructed in 1990, so it is 125 years old, older than the New Jersey average of 58.5 years.

The most recent inspection reported to the Federal Highway Administration rates it in fair condition with a lowest component rating of 5 out of 9. The lowest-rated primary component is rated 5 or 6. Minor deterioration is present but the structure is sound.

It carries about 573 vehicles a day, roughly 3% of them trucks, projected to reach 699 by 2043. The structure is 22 ft (6.7 m) long and 14 ft wide. If it were closed, the detour would be 1.9 mi (3 km).

CarriesBuffalo Hollow RD
CrossesWilloughby Brook
Location1.2 MI NE of Nj 31 JCT
RouteCity Street 0
Coordinates40.68964, -74.90381
Functional classRural Local

Condition and inspection

Fair

The lowest-rated primary component is rated 5 or 6. Minor deterioration is present but the structure is sound.

ComponentRatingMeaning
Deck6 SatisfactoryStructural elements show some minor deterioration.
Superstructure6 SatisfactoryStructural elements show some minor deterioration.
Substructure5 FairAll primary structural elements are sound but may have minor section loss, cracking, spalling or scour.
Channel and channel protection5 FairAll primary structural elements are sound but may have minor section loss, cracking, spalling or scour.
Last inspectionApril 2023
Inspection intervalevery 24 months
Operating statusOpen, no restriction
ScourCountermeasures installed to correct a previously existing problem
Structural evaluation4: Meets minimum tolerable limits to be left in place as is
Deck geometry2: Basically intolerable, requiring high priority of replacement
Waterway adequacy7: Better than present minimum criteria
Approach roadway alignment4: Meets minimum tolerable limits to be left in place as is
Operating rating32 US tons
Inventory rating19 US tons

Structure

MaterialSteel
DeckCorrugated steel
Main spans1
Design loadUnknown
Structure length22 ft (6.7 m)
Longest span21 ft (6.4 m)
Deck width14 ft (4.4 m)
Roadway width14 ft (4.2 m)
Vertical clearance over deckUnrestricted

Traffic and service

Average daily traffic573 (2023)
Projected traffic699 by 2043
Trucks3%
Lanes on structure1
Traffic directionOne-lane bridge for two-way traffic
CarriesHighway
CrossesWaterway
Detour if closed1.9 mi (3 km)
TollOn a free road
National Highway SystemNo

Ownership and planned work

OwnerCounty Highway Agency
Maintained byCounty Highway Agency
Historic statusNot eligible for the National Register of Historic Places
Work proposedWidening of existing bridge without deck rehabilitation
Estimated improvement cost$228,000 (2023 estimate)
NavigationNo navigation control on waterway

Frequently asked questions

When was Buffalo Hollow RD over Willoughby Brook built?

It was built in 1900, making it 125 years old in 2025. It was reconstructed in 1990.

What condition is Buffalo Hollow RD over Willoughby Brook in?

The National Bridge Inventory rates it in fair condition. The lowest-rated primary component is rated 5 or 6. Minor deterioration is present but the structure is sound. The last reported inspection was in April 2023.

How much traffic does Buffalo Hollow RD over Willoughby Brook carry?

About 573 vehicles per day (2023 count), of which roughly 3% are trucks.

How long is Buffalo Hollow RD over Willoughby Brook?

The structure is 22 ft (6.7 m) long with a longest span of 21 ft (6.4 m) and a deck 14 ft wide.

Who owns Buffalo Hollow RD over Willoughby Brook?

It is owned by the County Highway Agency.