US Bridges

I295RAMP over Beaver Creek

Good

Cumberland County, North Carolina · 0.75 Mi. S. Jct. Bragg Bl · Structure no. 000000000510370

Built
2018
7 years old
Condition
Good
inspected January 2024
Type
Stringer/Multi-beam or Girder
Steel Continuous
Length
673 ft
5 main spans
Daily traffic
4,300
2022 count
Owner
State
State Highway Agency

About this bridge

I295RAMP over Beaver Creek is a steel continuous stringer/multi-beam or girder carrying I295RAMP over Beaver Creek in Cumberland County, North Carolina. It was built in 2018, so it is 7 years old, younger than the North Carolina average of 38.7 years.

The most recent inspection reported to the Federal Highway Administration rates it in good condition with a lowest component rating of 7 out of 9. All primary components (deck, superstructure, substructure, or culvert) are rated 7 or higher. No significant problems were noted.

It carries about 4,300 vehicles a day, roughly 16% of them trucks, projected to reach 8,600 by 2040. The structure is 673 ft (205.1 m) long and 32 ft wide. If it were closed, the detour would be 0.6 mi (1 km).

CarriesI295RAMP
CrossesBeaver Creek
Location0.75 Mi. S. Jct. Bragg Bl
RouteInterstate 295
Coordinates35.11366, -78.97481
Functional classUrban Principal Arterial - Interstate

Condition and inspection

Good

All primary components (deck, superstructure, substructure, or culvert) are rated 7 or higher. No significant problems were noted.

ComponentRatingMeaning
Deck7 GoodSome minor problems.
Superstructure8 Very GoodNo problems noted.
Substructure8 Very GoodNo problems noted.
Channel and channel protection5 FairAll primary structural elements are sound but may have minor section loss, cracking, spalling or scour.
Last inspectionJanuary 2024
Inspection intervalevery 24 months
Operating statusOpen, no restriction
ScourFoundations stable; scour above top of footing
Structural evaluation8: Equal to present desirable criteria
Deck geometry9: Superior to present desirable criteria
Waterway adequacy9: Superior to present desirable criteria
Approach roadway alignment8: Equal to present desirable criteria
Operating rating81.9 US tons
Inventory rating48.9 US tons

Structure

MaterialSteel Continuous
DeckConcrete, cast-in-place
Main spans5
Design loadHS 25 or greater
Structure length673 ft (205.1 m)
Longest span138 ft (42 m)
Deck width32 ft (9.9 m)
Roadway width30 ft (9 m)
Vertical clearance over deckUnrestricted

Traffic and service

Average daily traffic4,300 (2022)
Projected traffic8,600 by 2040
Trucks16%
Lanes on structure1
Traffic directionOne-way traffic
CarriesHighway
CrossesWaterway
Detour if closed0.6 mi (1 km)
TollOn a free road
National Highway SystemYes

Ownership and planned work

OwnerState Highway Agency
Maintained byState Highway Agency
Historic statusNot eligible for the National Register of Historic Places
Work proposedNone recorded
Estimated improvement cost—
NavigationNo navigation control on waterway

Frequently asked questions

When was I295RAMP over Beaver Creek built?

It was built in 2018, making it 7 years old in 2025.

What condition is I295RAMP over Beaver Creek in?

The National Bridge Inventory rates it in good condition. All primary components (deck, superstructure, substructure, or culvert) are rated 7 or higher. No significant problems were noted. The last reported inspection was in January 2024.

How much traffic does I295RAMP over Beaver Creek carry?

About 4,300 vehicles per day (2022 count), of which roughly 16% are trucks.

How long is I295RAMP over Beaver Creek?

The structure is 673 ft (205.1 m) long with a longest span of 138 ft (42 m) and a deck 32 ft wide.

Who owns I295RAMP over Beaver Creek?

It is owned by the State Highway Agency.