US Bridges

Grinde RD over Warm Springs Creek 009

FairPosted for load

Fergus County, Montana · 4M SW Hilger · Structure no. L14208009+00001

Built
1986
39 years old
Condition
Fair
inspected June 2024
Type
Stringer/Multi-beam or Girder
Wood or Timber
Length
32 ft
1 main span
Daily traffic
100
2025 count
Owner
County
County Highway Agency

About this bridge

Grinde RD over Warm Springs Creek 009 is a wood or timber stringer/multi-beam or girder carrying Grinde RD over Warm Springs Creek 009 in Fergus County, Montana. It was built in 1986, so it is 39 years old, younger than the Montana average of 47 years.

The most recent inspection reported to the Federal Highway Administration rates it in fair condition with a lowest component rating of 5 out of 9. The lowest-rated primary component is rated 5 or 6. Minor deterioration is present but the structure is sound. Its operating status is: posted for load restriction.

It carries about 100 vehicles a day, roughly 3% of them trucks, projected to reach 100 by 2040. The structure is 32 ft (9.8 m) long and 20 ft wide. If it were closed, the detour would be 19.9 mi (32 km).

CarriesGrinde RD
CrossesWarm Springs Creek 009
Location4M SW Hilger
RouteCounty Highway 14208
StateMontana
Coordinates47.19928, -109.38151
Functional classRural Local

Condition and inspection

Fair

The lowest-rated primary component is rated 5 or 6. Minor deterioration is present but the structure is sound.

ComponentRatingMeaning
Deck7 GoodSome minor problems.
Superstructure6 SatisfactoryStructural elements show some minor deterioration.
Substructure5 FairAll primary structural elements are sound but may have minor section loss, cracking, spalling or scour.
Channel and channel protection5 FairAll primary structural elements are sound but may have minor section loss, cracking, spalling or scour.
Last inspectionJune 2024
Inspection intervalevery 24 months
Operating statusPosted for load restriction
ScourFoundations stable; scour above top of footing
Structural evaluation5: Somewhat better than minimum adequacy to tolerate being left in place as is
Deck geometry5: Somewhat better than minimum adequacy to tolerate being left in place as is
Waterway adequacy7: Better than present minimum criteria
Approach roadway alignment6: Equal to present minimum criteria
Operating rating33 US tons
Inventory rating23 US tons

Structure

MaterialWood or Timber
DeckWood or timber
Main spans1
Design loadUnknown
Structure length32 ft (9.8 m)
Longest span31 ft (9.4 m)
Deck width20 ft (6.1 m)
Roadway width20 ft (6.1 m)
Vertical clearance over deckUnrestricted

Traffic and service

Average daily traffic100 (2025)
Projected traffic100 by 2040
Trucks3%
Lanes on structure2
Traffic directionTwo-way traffic
CarriesHighway
CrossesWaterway
Detour if closed19.9 mi (32 km)
TollOn a free road
National Highway SystemNo

Ownership and planned work

OwnerCounty Highway Agency
Maintained byCounty Highway Agency
Historic statusNot eligible for the National Register of Historic Places
Work proposedNone recorded
Estimated improvement cost—
NavigationNo navigation control on waterway

Frequently asked questions

When was Grinde RD over Warm Springs Creek 009 built?

It was built in 1986, making it 39 years old in 2025.

What condition is Grinde RD over Warm Springs Creek 009 in?

The National Bridge Inventory rates it in fair condition. The lowest-rated primary component is rated 5 or 6. Minor deterioration is present but the structure is sound. The last reported inspection was in June 2024.

How much traffic does Grinde RD over Warm Springs Creek 009 carry?

About 100 vehicles per day (2025 count), of which roughly 3% are trucks.

How long is Grinde RD over Warm Springs Creek 009?

The structure is 32 ft (9.8 m) long with a longest span of 31 ft (9.4 m) and a deck 20 ft wide.

Who owns Grinde RD over Warm Springs Creek 009?

It is owned by the County Highway Agency.