Holder Road over Branch to Escatawpa Rive
GoodJackson County, Mississippi · Sec 12 T 5S R 5W · Structure no. SA300000000A177
- Built
- 2020
- 5 years old
- Condition
- Good
- inspected June 2024
- Type
- Channel Beam
- Concrete
- Length
- 57 ft
- 3 main spans
- Daily traffic
- 50
- 2024 count
- Owner
- County
- County Highway Agency
About this bridge
Holder Road over Branch to Escatawpa Rive is a concrete channel beam carrying Holder Road over Branch to Escatawpa Rive in Jackson County, Mississippi. It was built in 2020, so it is 5 years old, younger than the Mississippi average of 38.9 years.
The most recent inspection reported to the Federal Highway Administration rates it in good condition with a lowest component rating of 8 out of 9. All primary components (deck, superstructure, substructure, or culvert) are rated 7 or higher. No significant problems were noted.
It carries about 50 vehicles a day, roughly 5% of them trucks, projected to reach 75 by 2044. The structure is 57 ft (17.4 m) long and 25 ft wide. If it were closed, the detour would be 123.7 mi (199 km).
Location
Open in Google MapsCondition and inspection
All primary components (deck, superstructure, substructure, or culvert) are rated 7 or higher. No significant problems were noted.
| Component | Rating | Meaning |
|---|---|---|
| Deck | 8 Very Good | No problems noted. |
| Superstructure | 8 Very Good | No problems noted. |
| Substructure | 8 Very Good | No problems noted. |
| Channel and channel protection | 8 Very Good | No problems noted. |
Structure
Traffic and service
Ownership and planned work
Frequently asked questions
When was Holder Road over Branch to Escatawpa Rive built?
It was built in 2020, making it 5 years old in 2025.
What condition is Holder Road over Branch to Escatawpa Rive in?
The National Bridge Inventory rates it in good condition. All primary components (deck, superstructure, substructure, or culvert) are rated 7 or higher. No significant problems were noted. The last reported inspection was in June 2024.
How much traffic does Holder Road over Branch to Escatawpa Rive carry?
About 50 vehicles per day (2024 count), of which roughly 5% are trucks.
How long is Holder Road over Branch to Escatawpa Rive?
The structure is 57 ft (17.4 m) long with a longest span of 19 ft (5.8 m) and a deck 25 ft wide.
Who owns Holder Road over Branch to Escatawpa Rive?
It is owned by the County Highway Agency.