Elevator Loop RD over Bannock Creek
GoodPower County, Idaho · 6.4N 11.3E American Falls · Structure no. 000000000023511
- Built
- 2008
- 17 years old
- Condition
- Good
- inspected April 2022
- Type
- Stringer/Multi-beam or Girder
- Steel
- Length
- 45 ft
- 1 main span
- Daily traffic
- 40
- 2023 count
- Owner
- County
- County Highway Agency
About this bridge
Elevator Loop RD over Bannock Creek is a steel stringer/multi-beam or girder carrying Elevator Loop RD over Bannock Creek in Power County, Idaho. It was built in 2008, so it is 17 years old, younger than the Idaho average of 45.3 years.
The most recent inspection reported to the Federal Highway Administration rates it in good condition with a lowest component rating of 7 out of 9. All primary components (deck, superstructure, substructure, or culvert) are rated 7 or higher. No significant problems were noted.
It carries about 40 vehicles a day, roughly 33% of them trucks, projected to reach 60 by 2042. The structure is 45 ft (13.7 m) long and 37 ft wide. If it were closed, the detour would be 1.2 mi (2 km).
Location
Open in Google MapsCondition and inspection
All primary components (deck, superstructure, substructure, or culvert) are rated 7 or higher. No significant problems were noted.
| Component | Rating | Meaning |
|---|---|---|
| Deck | 7 Good | Some minor problems. |
| Superstructure | 8 Very Good | No problems noted. |
| Substructure | 8 Very Good | No problems noted. |
| Channel and channel protection | 6 Satisfactory | Structural elements show some minor deterioration. |
Structure
Traffic and service
Ownership and planned work
Frequently asked questions
When was Elevator Loop RD over Bannock Creek built?
It was built in 2008, making it 17 years old in 2025.
What condition is Elevator Loop RD over Bannock Creek in?
The National Bridge Inventory rates it in good condition. All primary components (deck, superstructure, substructure, or culvert) are rated 7 or higher. No significant problems were noted. The last reported inspection was in April 2022.
How much traffic does Elevator Loop RD over Bannock Creek carry?
About 40 vehicles per day (2023 count), of which roughly 33% are trucks.
How long is Elevator Loop RD over Bannock Creek?
The structure is 45 ft (13.7 m) long with a longest span of 42 ft (12.8 m) and a deck 37 ft wide.
Who owns Elevator Loop RD over Bannock Creek?
It is owned by the County Highway Agency.