US Bridges

Dalton Highway over Hammond River

Poor

Yukon-Koyukuk Census Area, Alaska · Mile Point 190.0 · Structure no. 1336

Built
1972
53 years old, rebuilt 1992
Condition
Poor
inspected July 2024
Type
Stringer/Multi-beam or Girder
Steel
Length
152 ft
1 main span
Daily traffic
110
2020 count
Owner
State
State Highway Agency

About this bridge

Dalton Highway over Hammond River is a steel stringer/multi-beam or girder carrying Dalton Highway over Hammond River in Yukon-Koyukuk Census Area, Alaska. It was built in 1972 and reconstructed in 1992, so it is 53 years old, older than the Alaska average of 35.9 years.

The most recent inspection reported to the Federal Highway Administration rates it in poor condition with a lowest component rating of 4 out of 9. The lowest-rated primary component is rated 4 or below, indicating advanced deterioration. Poor does not mean unsafe; such bridges are inspected more often and may carry load restrictions.

It carries about 110 vehicles a day, roughly 62% of them trucks, projected to reach 240 by 2039. The structure is 152 ft (46.3 m) long and 28 ft wide. If it were closed, the detour would be 123.7 mi (199 km).

CarriesDalton Highway
CrossesHammond River
LocationMile Point 190.0
RouteState Highway 65
StateAlaska
Coordinates67.46084, -150.03529
Functional classRural Principal Arterial - Other

Condition and inspection

Poor

The lowest-rated primary component is rated 4 or below, indicating advanced deterioration. Poor does not mean unsafe; such bridges are inspected more often and may carry load restrictions.

ComponentRatingMeaning
Deck6 SatisfactoryStructural elements show some minor deterioration.
Superstructure6 SatisfactoryStructural elements show some minor deterioration.
Substructure4 PoorAdvanced section loss, deterioration, spalling or scour.
Channel and channel protection7 GoodSome minor problems.
Last inspectionJuly 2024
Inspection intervalevery 24 months
Operating statusOpen, no restriction
ScourFoundations stable; scour above top of footing
Structural evaluation4: Meets minimum tolerable limits to be left in place as is
Deck geometry5: Somewhat better than minimum adequacy to tolerate being left in place as is
Waterway adequacy8: Equal to present desirable criteria
Approach roadway alignment8: Equal to present desirable criteria
Operating rating110.1 US tons
Inventory rating72.2 US tons

Structure

MaterialSteel
DeckConcrete, precast panels
Main spans1 (+3 approach)
Design loadHS 25 or greater
Structure length152 ft (46.3 m)
Longest span60 ft (18.3 m)
Deck width28 ft (8.4 m)
Roadway width27 ft (8.2 m)
Vertical clearance over deckUnrestricted

Traffic and service

Average daily traffic110 (2020)
Projected traffic240 by 2039
Trucks62%
Lanes on structure2
Traffic directionTwo-way traffic
CarriesHighway
CrossesWaterway
Detour if closed123.7 mi (199 km)
TollOn a free road
National Highway SystemYes

Ownership and planned work

OwnerState Highway Agency
Maintained byState Highway Agency
Historic statusNot eligible for the National Register of Historic Places
Work proposedNone recorded
Estimated improvement cost—
NavigationNo navigation control on waterway

Frequently asked questions

When was Dalton Highway over Hammond River built?

It was built in 1972, making it 53 years old in 2025. It was reconstructed in 1992.

What condition is Dalton Highway over Hammond River in?

The National Bridge Inventory rates it in poor condition. The lowest-rated primary component is rated 4 or below, indicating advanced deterioration. Poor does not mean unsafe; such bridges are inspected more often and may carry load restrictions. The last reported inspection was in July 2024.

How much traffic does Dalton Highway over Hammond River carry?

About 110 vehicles per day (2020 count), of which roughly 62% are trucks.

How long is Dalton Highway over Hammond River?

The structure is 152 ft (46.3 m) long with a longest span of 60 ft (18.3 m) and a deck 28 ft wide.

Who owns Dalton Highway over Hammond River?

It is owned by the State Highway Agency.