US Bridges

Barnes Blvd over Clover Creek

Poor

Pierce County, Washington · West of Bridge 84010 · Structure no. AFWAPQWY00001

Built
1955
70 years old
Condition
Poor
inspected June 2024
Type
Culvert
Steel
Length
45 ft
3 main spans
Daily traffic
3,000
2018 count
Owner
Federal
Army

About this bridge

Barnes Blvd over Clover Creek is a steel culvert carrying Barnes Blvd over Clover Creek in Pierce County, Washington. It was built in 1955, so it is 70 years old, older than the Washington average of 49.8 years.

The most recent inspection reported to the Federal Highway Administration rates it in poor condition with a lowest component rating of 4 out of 9. The lowest-rated primary component is rated 4 or below, indicating advanced deterioration. Poor does not mean unsafe; such bridges are inspected more often and may carry load restrictions.

It carries about 3,000 vehicles a day, roughly 50% of them trucks, projected to reach 3,000 by 2046. The structure is 45 ft (13.7 m) long. If it were closed, the detour would be 1.2 mi (2 km).

CarriesBarnes Blvd
CrossesClover Creek
LocationWest of Bridge 84010
Coordinates47.14239, -122.4938
Functional classUrban Local

Condition and inspection

Poor

The lowest-rated primary component is rated 4 or below, indicating advanced deterioration. Poor does not mean unsafe; such bridges are inspected more often and may carry load restrictions.

ComponentRatingMeaning
Channel and channel protection5 FairAll primary structural elements are sound but may have minor section loss, cracking, spalling or scour.
Culvert4 PoorAdvanced section loss, deterioration, spalling or scour.
Last inspectionJune 2024
Inspection intervalevery 24 months
Operating statusOpen, no restriction
ScourFoundations stable; scour above top of footing
Structural evaluation4: Meets minimum tolerable limits to be left in place as is
Waterway adequacy7: Better than present minimum criteria
Approach roadway alignment8: Equal to present desirable criteria
Operating rating86.1 US tons
Inventory rating66.5 US tons

Structure

Structure typeCulvert
MaterialSteel
DeckNot applicable
Main spans3
Design loadHS 20
Structure length45 ft (13.7 m)
Longest span13 ft (4 m)
Deck width0 ft (0 m)
Roadway width0 ft (0 m)
Vertical clearance over deckUnrestricted

Traffic and service

Average daily traffic3,000 (2018)
Projected traffic3,000 by 2046
Trucks50%
Lanes on structure3
Traffic directionTwo-way traffic
CarriesHighway and pedestrian
CrossesWaterway
Detour if closed1.2 mi (2 km)
TollOn a free road
National Highway SystemNo

Ownership and planned work

OwnerArmy
Maintained byArmy
Historic statusNot eligible for the National Register of Historic Places
Work proposedRehabilitation because of general structure deterioration or inadequate strength
Estimated improvement cost$2,000 (2024 estimate)
NavigationNo navigation control on waterway

Frequently asked questions

When was Barnes Blvd over Clover Creek built?

It was built in 1955, making it 70 years old in 2025.

What condition is Barnes Blvd over Clover Creek in?

The National Bridge Inventory rates it in poor condition. The lowest-rated primary component is rated 4 or below, indicating advanced deterioration. Poor does not mean unsafe; such bridges are inspected more often and may carry load restrictions. The last reported inspection was in June 2024.

How much traffic does Barnes Blvd over Clover Creek carry?

About 3,000 vehicles per day (2018 count), of which roughly 50% are trucks.

How long is Barnes Blvd over Clover Creek?

The structure is 45 ft (13.7 m) long with a longest span of 13 ft (4 m).

Who owns Barnes Blvd over Clover Creek?

It is owned by the Army.