US Bridges

Beeville Loop over Rabbit Creek

Good

Mason County, Washington · Beeville Loop · Structure no. 088237000000000

Built
2010
15 years old
Condition
Good
inspected July 2024
Type
Culvert
Steel
Length
25 ft
1 main span
Daily traffic
32
2020 count
Owner
County
County Highway Agency

About this bridge

Beeville Loop over Rabbit Creek is a steel culvert carrying Beeville Loop over Rabbit Creek in Mason County, Washington. It was built in 2010, so it is 15 years old, younger than the Washington average of 49.8 years.

The most recent inspection reported to the Federal Highway Administration rates it in good condition with a lowest component rating of 8 out of 9. All primary components (deck, superstructure, substructure, or culvert) are rated 7 or higher. No significant problems were noted.

It carries about 32 vehicles a day, roughly 20% of them trucks, projected to reach 200 by 2044. The structure is 25 ft (7.5 m) long and 30 ft wide. If it were closed, the detour would be 14.9 mi (24 km).

Location

Open in Google Maps
CarriesBeeville Loop
CrossesRabbit Creek
LocationBeeville Loop
RouteCounty Highway 1420
CountyMason County
StateWashington
Coordinates47.27872, -123.45728
Functional classRural Minor Collector

Condition and inspection

Good

All primary components (deck, superstructure, substructure, or culvert) are rated 7 or higher. No significant problems were noted.

ComponentRatingMeaning
Channel and channel protection8 Very GoodNo problems noted.
Culvert8 Very GoodNo problems noted.
Last inspectionJuly 2024
Inspection intervalevery 24 months
Operating statusOpen, no restriction
ScourFoundations stable; scour above top of footing
Structural evaluation6: Equal to present minimum criteria
Deck geometry7: Better than present minimum criteria
Waterway adequacy5: Somewhat better than minimum adequacy to tolerate being left in place as is
Approach roadway alignment8: Equal to present desirable criteria
Operating rating39 US tons
Inventory rating30 US tons

Structure

Structure typeCulvert
MaterialSteel
DeckNot applicable
Main spans1
Design loadHS 20
Structure length25 ft (7.5 m)
Longest span25 ft (7.5 m)
Deck width30 ft (9.1 m)
Roadway width28 ft (8.5 m)
Vertical clearance over deckUnrestricted

Traffic and service

Average daily traffic32 (2020)
Projected traffic200 by 2044
Trucks20%
Lanes on structure2
Traffic directionTwo-way traffic
CarriesHighway
CrossesWaterway
Detour if closed14.9 mi (24 km)
TollOn a free road
National Highway SystemNo

Ownership and planned work

OwnerCounty Highway Agency
Maintained byCounty Highway Agency
Historic statusHistorical significance not determinable at this time
Work proposedOther structural work, including hydraulic replacements
Estimated improvement cost$258,000 (2022 estimate)
NavigationNo navigation control on waterway

Frequently asked questions

When was Beeville Loop over Rabbit Creek built?

It was built in 2010, making it 15 years old in 2025.

What condition is Beeville Loop over Rabbit Creek in?

The National Bridge Inventory rates it in good condition. All primary components (deck, superstructure, substructure, or culvert) are rated 7 or higher. No significant problems were noted. The last reported inspection was in July 2024.

How much traffic does Beeville Loop over Rabbit Creek carry?

About 32 vehicles per day (2020 count), of which roughly 20% are trucks.

How long is Beeville Loop over Rabbit Creek?

The structure is 25 ft (7.5 m) long with a longest span of 25 ft (7.5 m) and a deck 30 ft wide.

Who owns Beeville Loop over Rabbit Creek?

It is owned by the County Highway Agency.