US Bridges

Agate RD over Campbell Creek

Good

Mason County, Washington · 3.13 S JCT SR3 · Structure no. 086009000000000

Built
1993
32 years old
Condition
Good
inspected May 2024
Type
Culvert
Steel
Length
26 ft
1 main span
Daily traffic
3,036
2020 count
Owner
County
County Highway Agency

About this bridge

Agate RD over Campbell Creek is a steel culvert carrying Agate RD over Campbell Creek in Mason County, Washington. It was built in 1993, so it is 32 years old, younger than the Washington average of 49.8 years.

The most recent inspection reported to the Federal Highway Administration rates it in good condition with a lowest component rating of 7 out of 9. All primary components (deck, superstructure, substructure, or culvert) are rated 7 or higher. No significant problems were noted.

It carries about 3,036 vehicles a day, roughly 5% of them trucks, projected to reach 4,663 by 2040. The structure is 26 ft (7.9 m) long and 37 ft wide. If it were closed, the detour would be 3.7 mi (6 km).

CarriesAgate RD
CrossesCampbell Creek
Location3.13 S JCT SR3
RouteCounty Highway 23910
Coordinates47.22306, -123.01272
Functional classRural Minor Collector

Condition and inspection

Good

All primary components (deck, superstructure, substructure, or culvert) are rated 7 or higher. No significant problems were noted.

ComponentRatingMeaning
Channel and channel protection7 GoodSome minor problems.
Culvert7 GoodSome minor problems.
Last inspectionMay 2024
Inspection intervalevery 24 months
Operating statusOpen, no restriction
ScourFoundations stable; scour within limits of footing or piles
Structural evaluation7: Better than present minimum criteria
Deck geometry5: Somewhat better than minimum adequacy to tolerate being left in place as is
Waterway adequacy8: Equal to present desirable criteria
Approach roadway alignment8: Equal to present desirable criteria
Operating rating66 US tons
Inventory rating51 US tons

Structure

Structure typeCulvert
MaterialSteel
DeckNot applicable
Main spans1
Design loadHS 20
Structure length26 ft (7.9 m)
Longest span26 ft (7.9 m)
Deck width37 ft (11.4 m)
Roadway width34 ft (10.4 m)
Vertical clearance over deckUnrestricted

Traffic and service

Average daily traffic3,036 (2020)
Projected traffic4,663 by 2040
Trucks5%
Lanes on structure2
Traffic directionTwo-way traffic
CarriesHighway
CrossesWaterway
Detour if closed3.7 mi (6 km)
TollOn a free road
National Highway SystemNo

Ownership and planned work

OwnerCounty Highway Agency
Maintained byCounty Highway Agency
Historic statusHistorical significance not determinable at this time
Work proposedReplacement because of substandard load-carrying capacity or roadway geometry
Estimated improvement cost$1.3 million (2022 estimate)
NavigationNo navigation control on waterway

Frequently asked questions

When was Agate RD over Campbell Creek built?

It was built in 1993, making it 32 years old in 2025.

What condition is Agate RD over Campbell Creek in?

The National Bridge Inventory rates it in good condition. All primary components (deck, superstructure, substructure, or culvert) are rated 7 or higher. No significant problems were noted. The last reported inspection was in May 2024.

How much traffic does Agate RD over Campbell Creek carry?

About 3,036 vehicles per day (2020 count), of which roughly 5% are trucks.

How long is Agate RD over Campbell Creek?

The structure is 26 ft (7.9 m) long with a longest span of 26 ft (7.9 m) and a deck 37 ft wide.

Who owns Agate RD over Campbell Creek?

It is owned by the County Highway Agency.