US Bridges

Lake Tapps Parkway over E Valley Highway

Fair

King County, Washington · Lake Tapps Pky @ E Valley · Structure no. 087563000000000

Built
2003
22 years old
Condition
Fair
inspected August 2024
Type
Stringer/Multi-beam or Girder
Concrete Continuous
Length
448 ft
4 main spans
Daily traffic
17,243
2019 count
Owner
City
City or Municipal Highway Agency

About this bridge

Lake Tapps Parkway over E Valley Highway is a concrete continuous stringer/multi-beam or girder carrying Lake Tapps Parkway over E Valley Highway in King County, Washington. It was built in 2003, so it is 22 years old, younger than the Washington average of 49.8 years.

The most recent inspection reported to the Federal Highway Administration rates it in fair condition with a lowest component rating of 6 out of 9. The lowest-rated primary component is rated 5 or 6. Minor deterioration is present but the structure is sound.

It carries about 17,243 vehicles a day, roughly 10% of them trucks, projected to reach 35,000 by 2039. The structure is 448 ft (136.6 m) long and 89 ft wide. If it were closed, the detour would be 1.9 mi (3 km).

CarriesLake Tapps Parkway
CrossesE Valley Highway
LocationLake Tapps Pky @ E Valley
RouteCity Street 98600
Coordinates47.25072, -122.22997
Functional classUrban Other Principal Arterial

Condition and inspection

Fair

The lowest-rated primary component is rated 5 or 6. Minor deterioration is present but the structure is sound.

ComponentRatingMeaning
Deck6 SatisfactoryStructural elements show some minor deterioration.
Superstructure6 SatisfactoryStructural elements show some minor deterioration.
Substructure6 SatisfactoryStructural elements show some minor deterioration.
Last inspectionAugust 2024
Inspection intervalevery 24 months
Operating statusOpen, no restriction
ScourBridge not over waterway
Structural evaluation6: Equal to present minimum criteria
Deck geometry5: Somewhat better than minimum adequacy to tolerate being left in place as is
Approach roadway alignment8: Equal to present desirable criteria
Operating rating79 US tons
Inventory rating47 US tons

Structure

MaterialConcrete Continuous
DeckConcrete, cast-in-place
Main spans4
Design loadHS 25 or greater
Structure length448 ft (136.6 m)
Longest span112 ft (34.1 m)
Deck width89 ft (27.1 m)
Roadway width77 ft (23.5 m)
Vertical clearance over deckUnrestricted

Traffic and service

Average daily traffic17,243 (2019)
Projected traffic35,000 by 2039
Trucks10%
Lanes on structure6
Traffic directionTwo-way traffic
CarriesHighway
CrossesHighway and railroad
Detour if closed1.9 mi (3 km)
TollOn a free road
National Highway SystemYes

Ownership and planned work

OwnerCity or Municipal Highway Agency
Maintained byCity or Municipal Highway Agency
Historic statusNot eligible for the National Register of Historic Places
Work proposedWidening with deck rehabilitation or replacement
Estimated improvement cost$16.8 million (2022 estimate)
NavigationNot applicable (no waterway)

Frequently asked questions

When was Lake Tapps Parkway over E Valley Highway built?

It was built in 2003, making it 22 years old in 2025.

What condition is Lake Tapps Parkway over E Valley Highway in?

The National Bridge Inventory rates it in fair condition. The lowest-rated primary component is rated 5 or 6. Minor deterioration is present but the structure is sound. The last reported inspection was in August 2024.

How much traffic does Lake Tapps Parkway over E Valley Highway carry?

About 17,243 vehicles per day (2019 count), of which roughly 10% are trucks.

How long is Lake Tapps Parkway over E Valley Highway?

The structure is 448 ft (136.6 m) long with a longest span of 112 ft (34.1 m) and a deck 89 ft wide.

Who owns Lake Tapps Parkway over E Valley Highway?

It is owned by the City or Municipal Highway Agency.