US Bridges

Vt 00009 Ml over Roaring Branch

Good

Bennington County, Vermont · 2.0 MI E Jct. U.S. 7 · Structure no. 200010000902022

Built
1940
85 years old, rebuilt 1988
Condition
Good
inspected June 2023
Type
Stringer/Multi-beam or Girder
Steel Continuous
Length
252 ft
3 main spans
Daily traffic
4,500
2018 count
Owner
State
State Highway Agency

About this bridge

Vt 00009 Ml over Roaring Branch is a steel continuous stringer/multi-beam or girder carrying Vt 00009 Ml over Roaring Branch in Bennington County, Vermont. It was built in 1940 and reconstructed in 1988, so it is 85 years old, older than the Vermont average of 60.8 years.

The most recent inspection reported to the Federal Highway Administration rates it in good condition with a lowest component rating of 7 out of 9. All primary components (deck, superstructure, substructure, or culvert) are rated 7 or higher. No significant problems were noted.

It carries about 4,500 vehicles a day, roughly 10% of them trucks, projected to reach 4,725 by 2028. The structure is 252 ft (76.8 m) long and 41 ft wide. If it were closed, the detour would be 21.1 mi (34 km).

CarriesVt 00009 Ml
CrossesRoaring Branch
Location2.0 MI E Jct. U.S. 7
RouteState Highway 9
StateVermont
Coordinates42.88328, -73.15891
Functional classUrban Other Principal Arterial

Condition and inspection

Good

All primary components (deck, superstructure, substructure, or culvert) are rated 7 or higher. No significant problems were noted.

ComponentRatingMeaning
Deck7 GoodSome minor problems.
Superstructure7 GoodSome minor problems.
Substructure7 GoodSome minor problems.
Channel and channel protection8 Very GoodNo problems noted.
Last inspectionJune 2023
Inspection intervalevery 24 months
Operating statusOpen, no restriction
ScourFoundations stable; scour above top of footing
Structural evaluation7: Better than present minimum criteria
Deck geometry6: Equal to present minimum criteria
Waterway adequacy7: Better than present minimum criteria
Approach roadway alignment8: Equal to present desirable criteria
Operating rating99 US tons
Inventory rating65 US tons

Structure

MaterialSteel Continuous
DeckConcrete, cast-in-place
Main spans3
Design loadHS 25 or greater
Structure length252 ft (76.8 m)
Longest span84 ft (25.6 m)
Deck width41 ft (12.5 m)
Roadway width40 ft (12.2 m)
Vertical clearance over deckUnrestricted

Traffic and service

Average daily traffic4,500 (2018)
Projected traffic4,725 by 2028
Trucks10%
Lanes on structure2
Traffic directionTwo-way traffic
CarriesHighway and pedestrian
CrossesWaterway
Detour if closed21.1 mi (34 km)
TollOn a free road
National Highway SystemYes
Strategic Highway NetworkInterstate STRAHNET route

Ownership and planned work

OwnerState Highway Agency
Maintained byState Highway Agency
Historic statusNot eligible for the National Register of Historic Places
Work proposedNone recorded
Estimated improvement cost—
NavigationNo navigation control on waterway

Frequently asked questions

When was Vt 00009 Ml over Roaring Branch built?

It was built in 1940, making it 85 years old in 2025. It was reconstructed in 1988.

What condition is Vt 00009 Ml over Roaring Branch in?

The National Bridge Inventory rates it in good condition. All primary components (deck, superstructure, substructure, or culvert) are rated 7 or higher. No significant problems were noted. The last reported inspection was in June 2023.

How much traffic does Vt 00009 Ml over Roaring Branch carry?

About 4,500 vehicles per day (2018 count), of which roughly 10% are trucks.

How long is Vt 00009 Ml over Roaring Branch?

The structure is 252 ft (76.8 m) long with a longest span of 84 ft (25.6 m) and a deck 41 ft wide.

Who owns Vt 00009 Ml over Roaring Branch?

It is owned by the State Highway Agency.