Riverside Drive over Beaver Branch
GoodDanville city, Virginia · 012829 Bus 010129 Cen B · Structure no. 000000000020203
- Built
- 1948
- 77 years old
- Condition
- Good
- inspected January 2024
- Type
- Culvert
- Concrete
- Length
- 23 ft
- 2 main spans
- Daily traffic
- 18,825
- 2022 count
- Owner
- City
- City or Municipal Highway Agency
About this bridge
Riverside Drive over Beaver Branch is a concrete culvert carrying Riverside Drive over Beaver Branch in Danville city, Virginia. It was built in 1948, so it is 77 years old, older than the Virginia average of 50.7 years.
The most recent inspection reported to the Federal Highway Administration rates it in good condition with a lowest component rating of 7 out of 9. All primary components (deck, superstructure, substructure, or culvert) are rated 7 or higher. No significant problems were noted.
It carries about 18,825 vehicles a day, projected to reach 20,990 by 2042. The structure is 23 ft (7 m) long. If it were closed, the detour would be 1.2 mi (2 km).
Location
Open in Google MapsCondition and inspection
All primary components (deck, superstructure, substructure, or culvert) are rated 7 or higher. No significant problems were noted.
| Component | Rating | Meaning |
|---|---|---|
| Channel and channel protection | 6 Satisfactory | Structural elements show some minor deterioration. |
| Culvert | 7 Good | Some minor problems. |
Structure
Traffic and service
Ownership and planned work
Frequently asked questions
When was Riverside Drive over Beaver Branch built?
It was built in 1948, making it 77 years old in 2025.
What condition is Riverside Drive over Beaver Branch in?
The National Bridge Inventory rates it in good condition. All primary components (deck, superstructure, substructure, or culvert) are rated 7 or higher. No significant problems were noted. The last reported inspection was in January 2024.
How much traffic does Riverside Drive over Beaver Branch carry?
About 18,825 vehicles per day (2022 count).
How long is Riverside Drive over Beaver Branch?
The structure is 23 ft (7 m) long with a longest span of 11 ft (3.4 m).
Who owns Riverside Drive over Beaver Branch?
It is owned by the City or Municipal Highway Agency.