US Bridges

Jefferson Mill RD over Hardware River

Good

Albemarle County, Virginia · 1.27 FR 795 / 1.45 to 622 · Structure no. 000000000000659

Built
1970
55 years old, rebuilt 2007
Condition
Good
inspected October 2023
Type
Slab
Prestressed Concrete
Length
160 ft
3 main spans
Daily traffic
565
2022 count
Owner
State
State Highway Agency

About this bridge

Jefferson Mill RD over Hardware River is a prestressed concrete slab carrying Jefferson Mill RD over Hardware River in Albemarle County, Virginia. It was built in 1970 and reconstructed in 2007, so it is 55 years old, older than the Virginia average of 50.7 years.

The most recent inspection reported to the Federal Highway Administration rates it in good condition with a lowest component rating of 7 out of 9. All primary components (deck, superstructure, substructure, or culvert) are rated 7 or higher. No significant problems were noted.

It carries about 565 vehicles a day, roughly 1% of them trucks, projected to reach 689 by 2045. The structure is 160 ft (48.7 m) long and 28 ft wide. If it were closed, the detour would be 3.7 mi (6 km).

CarriesJefferson Mill RD
CrossesHardware River
Location1.27 FR 795 / 1.45 to 622
RouteCounty Highway 618
Coordinates37.83968, -78.47454
Functional classRural Minor Collector

Condition and inspection

Good

All primary components (deck, superstructure, substructure, or culvert) are rated 7 or higher. No significant problems were noted.

ComponentRatingMeaning
Deck8 Very GoodNo problems noted.
Superstructure8 Very GoodNo problems noted.
Substructure7 GoodSome minor problems.
Channel and channel protection5 FairAll primary structural elements are sound but may have minor section loss, cracking, spalling or scour.
Last inspectionOctober 2023
Inspection intervalevery 24 months
Operating statusOpen, no restriction
ScourFoundations stable; scour above top of footing
Structural evaluation7: Better than present minimum criteria
Deck geometry4: Meets minimum tolerable limits to be left in place as is
Waterway adequacy7: Better than present minimum criteria
Approach roadway alignment6: Equal to present minimum criteria
Operating rating83 US tons
Inventory rating64 US tons

Structure

Structure typeSlab
MaterialPrestressed Concrete
DeckOther
Main spans3
Design loadHS 20 + Mod
Structure length160 ft (48.7 m)
Longest span52 ft (16 m)
Deck width28 ft (8.5 m)
Roadway width25 ft (7.5 m)
Vertical clearance over deckUnrestricted

Traffic and service

Average daily traffic565 (2022)
Projected traffic689 by 2045
Trucks1%
Lanes on structure2
Traffic directionTwo-way traffic
CarriesHighway
CrossesWaterway
Detour if closed3.7 mi (6 km)
TollOn a free road
National Highway SystemNo

Ownership and planned work

OwnerState Highway Agency
Maintained byState Highway Agency
Historic statusNot eligible for the National Register of Historic Places
Work proposedNone recorded
Estimated improvement cost—
NavigationNo navigation control on waterway

Frequently asked questions

When was Jefferson Mill RD over Hardware River built?

It was built in 1970, making it 55 years old in 2025. It was reconstructed in 2007.

What condition is Jefferson Mill RD over Hardware River in?

The National Bridge Inventory rates it in good condition. All primary components (deck, superstructure, substructure, or culvert) are rated 7 or higher. No significant problems were noted. The last reported inspection was in October 2023.

How much traffic does Jefferson Mill RD over Hardware River carry?

About 565 vehicles per day (2022 count), of which roughly 1% are trucks.

How long is Jefferson Mill RD over Hardware River?

The structure is 160 ft (48.7 m) long with a longest span of 52 ft (16 m) and a deck 28 ft wide.

Who owns Jefferson Mill RD over Hardware River?

It is owned by the State Highway Agency.