US Bridges

Holdaway Lane over Beaver River

Fair

Beaver County, Utah · 1.5 Miles Se. of Beaver · Structure no. 001002F

Built
1985
40 years old
Condition
Fair
inspected March 2024
Type
Tee Beam
Prestressed Concrete
Length
27 ft
1 main span
Daily traffic
50
2010 count
Owner
City
City or Municipal Highway Agency

About this bridge

Holdaway Lane over Beaver River is a prestressed concrete tee beam carrying Holdaway Lane over Beaver River in Beaver County, Utah. It was built in 1985, so it is 40 years old, younger than the Utah average of 40.1 years.

The most recent inspection reported to the Federal Highway Administration rates it in fair condition with a lowest component rating of 6 out of 9. The lowest-rated primary component is rated 5 or 6. Minor deterioration is present but the structure is sound.

It carries about 50 vehicles a day, projected to reach 61 by 2030. The structure is 27 ft (8.2 m) long and 20 ft wide. If it were closed, the detour would be 5 mi (8 km).

Location

Open in Google Maps
CarriesHoldaway Lane
CrossesBeaver River
Location1.5 Miles Se. of Beaver
RouteCounty Highway 0
CountyBeaver County
StateUtah
Coordinates38.27233, -112.61356
Functional classRural Local

Condition and inspection

Fair

The lowest-rated primary component is rated 5 or 6. Minor deterioration is present but the structure is sound.

ComponentRatingMeaning
Deck6 SatisfactoryStructural elements show some minor deterioration.
Superstructure6 SatisfactoryStructural elements show some minor deterioration.
Substructure6 SatisfactoryStructural elements show some minor deterioration.
Channel and channel protection8 Very GoodNo problems noted.
Last inspectionMarch 2024
Inspection intervalevery 24 months
Operating statusOpen, no restriction
ScourFoundations stable; scour within limits of footing or piles
Structural evaluation5: Somewhat better than minimum adequacy to tolerate being left in place as is
Waterway adequacy6: Equal to present minimum criteria
Approach roadway alignment6: Equal to present minimum criteria
Operating rating35.7 US tons
Inventory rating21.4 US tons

Structure

Structure typeTee Beam
MaterialPrestressed Concrete
DeckConcrete, precast panels
Main spans1
Design loadHS 20 + Mod
Structure length27 ft (8.2 m)
Longest span24 ft (7.3 m)
Deck width20 ft (6.1 m)
Roadway width17 ft (5.2 m)
Vertical clearance over deckUnrestricted

Traffic and service

Average daily traffic50 (2010)
Projected traffic61 by 2030
Trucks0%
Lanes on structure2
Traffic directionOne-lane bridge for two-way traffic
CarriesHighway
CrossesWaterway
Detour if closed5 mi (8 km)
TollOn a free road
National Highway SystemNo

Ownership and planned work

OwnerCity or Municipal Highway Agency
Maintained byCity or Municipal Highway Agency
Historic statusNot eligible for the National Register of Historic Places
Work proposedNone recorded
Estimated improvement cost—
NavigationNot applicable (no waterway)

Frequently asked questions

When was Holdaway Lane over Beaver River built?

It was built in 1985, making it 40 years old in 2025.

What condition is Holdaway Lane over Beaver River in?

The National Bridge Inventory rates it in fair condition. The lowest-rated primary component is rated 5 or 6. Minor deterioration is present but the structure is sound. The last reported inspection was in March 2024.

How much traffic does Holdaway Lane over Beaver River carry?

About 50 vehicles per day (2010 count).

How long is Holdaway Lane over Beaver River?

The structure is 27 ft (8.2 m) long with a longest span of 24 ft (7.3 m) and a deck 20 ft wide.

Who owns Holdaway Lane over Beaver River?

It is owned by the City or Municipal Highway Agency.