US Bridges

CR 3201 over Talley Br

Good

Rusk County, Texas · 0.32 MI S of FM 2496 · Structure no. 102010AA3201101

Built
2015
10 years old
Condition
Good
inspected February 2024
Type
Stringer/Multi-beam or Girder
Steel
Length
25 ft
1 main span
Daily traffic
50
2016 count
Owner
County
County Highway Agency

About this bridge

CR 3201 over Talley Br is a steel stringer/multi-beam or girder carrying CR 3201 over Talley Br in Rusk County, Texas. It was built in 2015, so it is 10 years old, younger than the Texas average of 44.4 years.

The most recent inspection reported to the Federal Highway Administration rates it in good condition with a lowest component rating of 7 out of 9. All primary components (deck, superstructure, substructure, or culvert) are rated 7 or higher. No significant problems were noted.

It carries about 50 vehicles a day, projected to reach 100 by 2036. The structure is 25 ft (7.6 m) long and 18 ft wide. If it were closed, the detour would be 3.7 mi (6 km).

Location

Open in Google Maps
CarriesCR 3201
CrossesTalley Br
Location0.32 MI S of FM 2496
RouteCounty Highway 0
CountyRusk County
StateTexas
Coordinates31.93384, -94.72255
Functional classRural Local

Condition and inspection

Good

All primary components (deck, superstructure, substructure, or culvert) are rated 7 or higher. No significant problems were noted.

ComponentRatingMeaning
Deck7 GoodSome minor problems.
Superstructure7 GoodSome minor problems.
Substructure7 GoodSome minor problems.
Channel and channel protection7 GoodSome minor problems.
Last inspectionFebruary 2024
Inspection intervalevery 24 months
Operating statusOpen, no restriction
ScourFoundations stable; scour within limits of footing or piles
Structural evaluation7: Better than present minimum criteria
Deck geometry3: Basically intolerable, requiring high priority of corrective action
Waterway adequacy4: Meets minimum tolerable limits to be left in place as is
Approach roadway alignment8: Equal to present desirable criteria
Operating rating75 US tons
Inventory rating45 US tons

Structure

Structure typeStringer/Multi-beam or Girder
MaterialSteel
DeckConcrete, cast-in-place
Main spans1
Design loadUnknown
Structure length25 ft (7.6 m)
Longest span24 ft (7.4 m)
Deck width18 ft (5.5 m)
Roadway width17 ft (5.3 m)
Vertical clearance over deckUnrestricted

Traffic and service

Average daily traffic50 (2016)
Projected traffic100 by 2036
Trucks0%
Lanes on structure1
Traffic directionOne-lane bridge for two-way traffic
CarriesHighway
CrossesWaterway
Detour if closed3.7 mi (6 km)
TollOn a free road
National Highway SystemNo

Ownership and planned work

OwnerCounty Highway Agency
Maintained byCounty Highway Agency
Historic statusNot eligible for the National Register of Historic Places
Work proposedNone recorded
Estimated improvement cost—
NavigationNo navigation control on waterway

Frequently asked questions

When was CR 3201 over Talley Br built?

It was built in 2015, making it 10 years old in 2025.

What condition is CR 3201 over Talley Br in?

The National Bridge Inventory rates it in good condition. All primary components (deck, superstructure, substructure, or culvert) are rated 7 or higher. No significant problems were noted. The last reported inspection was in February 2024.

How much traffic does CR 3201 over Talley Br carry?

About 50 vehicles per day (2016 count).

How long is CR 3201 over Talley Br?

The structure is 25 ft (7.6 m) long with a longest span of 24 ft (7.4 m) and a deck 18 ft wide.

Who owns CR 3201 over Talley Br?

It is owned by the County Highway Agency.