US Bridges

Bamore RD over Seabourne Creek

Good

Fort Bend County, Texas · 0.2 MI SW of US 59 · Structure no. 120800C00120001

Built
2007
18 years old
Condition
Good
inspected November 2023
Type
Culvert
Steel
Length
36 ft
3 main spans
Daily traffic
500
2010 count
Owner
Town / Township
Town or Township Highway Agency

About this bridge

Bamore RD over Seabourne Creek is a steel culvert carrying Bamore RD over Seabourne Creek in Fort Bend County, Texas. It was built in 2007, so it is 18 years old, younger than the Texas average of 44.4 years.

The most recent inspection reported to the Federal Highway Administration rates it in good condition with a lowest component rating of 7 out of 9. All primary components (deck, superstructure, substructure, or culvert) are rated 7 or higher. No significant problems were noted.

It carries about 500 vehicles a day, projected to reach 1,000 by 2030. The structure is 36 ft (11 m) long and 35 ft wide. If it were closed, the detour would be 1.2 mi (2 km).

Location

Open in Google Maps
CarriesBamore RD
CrossesSeabourne Creek
Location0.2 MI SW of US 59
RouteCity Street 0
CountyFort Bend County
StateTexas
Coordinates29.52906, -95.8189
Functional classUrban Collector

Condition and inspection

Good

All primary components (deck, superstructure, substructure, or culvert) are rated 7 or higher. No significant problems were noted.

ComponentRatingMeaning
Channel and channel protection8 Very GoodNo problems noted.
Culvert7 GoodSome minor problems.
Last inspectionNovember 2023
Inspection intervalevery 24 months
Operating statusOpen, no restriction
ScourFoundations stable; scour above top of footing
Structural evaluation7: Better than present minimum criteria
Deck geometry2: Basically intolerable, requiring high priority of replacement
Waterway adequacy7: Better than present minimum criteria
Approach roadway alignment8: Equal to present desirable criteria
Operating rating60 US tons
Inventory rating36 US tons

Structure

Structure typeCulvert
MaterialSteel
DeckConcrete, cast-in-place
Main spans3
Design loadHS 20
Structure length36 ft (11 m)
Longest span11 ft (3.4 m)
Deck width35 ft (10.7 m)
Roadway width24 ft (7.3 m)
Vertical clearance over deckUnrestricted

Traffic and service

Average daily traffic500 (2010)
Projected traffic1,000 by 2030
Trucks0%
Lanes on structure2
Traffic directionOne-way traffic
CarriesHighway
CrossesWaterway
Detour if closed1.2 mi (2 km)
TollOn a free road
National Highway SystemNo

Ownership and planned work

OwnerTown or Township Highway Agency
Maintained byTown or Township Highway Agency
Historic statusNot eligible for the National Register of Historic Places
Work proposedNone recorded
Estimated improvement cost—
NavigationNo navigation control on waterway

Frequently asked questions

When was Bamore RD over Seabourne Creek built?

It was built in 2007, making it 18 years old in 2025.

What condition is Bamore RD over Seabourne Creek in?

The National Bridge Inventory rates it in good condition. All primary components (deck, superstructure, substructure, or culvert) are rated 7 or higher. No significant problems were noted. The last reported inspection was in November 2023.

How much traffic does Bamore RD over Seabourne Creek carry?

About 500 vehicles per day (2010 count).

How long is Bamore RD over Seabourne Creek?

The structure is 36 ft (11 m) long with a longest span of 11 ft (3.4 m) and a deck 35 ft wide.

Who owns Bamore RD over Seabourne Creek?

It is owned by the Town or Township Highway Agency.