Industry RD over Mill Branch
GoodAustin County, Texas · 1.1 MI SW of FM 2502 · Structure no. 130080AA5145001
- Built
- 2012
- 13 years old
- Condition
- Good
- inspected January 2024
- Type
- Stringer/Multi-beam or Girder
- Steel
- Length
- 29 ft
- 1 main span
- Daily traffic
- 60
- 2022 count
- Owner
- County
- County Highway Agency
About this bridge
Industry RD over Mill Branch is a steel stringer/multi-beam or girder carrying Industry RD over Mill Branch in Austin County, Texas. It was built in 2012, so it is 13 years old, younger than the Texas average of 44.4 years.
The most recent inspection reported to the Federal Highway Administration rates it in good condition with a lowest component rating of 7 out of 9. All primary components (deck, superstructure, substructure, or culvert) are rated 7 or higher. No significant problems were noted.
It carries about 60 vehicles a day, roughly 3% of them trucks, projected to reach 60 by 2042. The structure is 29 ft (8.8 m) long and 26 ft wide. If it were closed, the detour would be 6.2 mi (10 km).
Location
Open in Google MapsCondition and inspection
All primary components (deck, superstructure, substructure, or culvert) are rated 7 or higher. No significant problems were noted.
| Component | Rating | Meaning |
|---|---|---|
| Deck | 7 Good | Some minor problems. |
| Superstructure | 7 Good | Some minor problems. |
| Substructure | 7 Good | Some minor problems. |
| Channel and channel protection | 6 Satisfactory | Structural elements show some minor deterioration. |
Structure
Traffic and service
Ownership and planned work
Frequently asked questions
When was Industry RD over Mill Branch built?
It was built in 2012, making it 13 years old in 2025.
What condition is Industry RD over Mill Branch in?
The National Bridge Inventory rates it in good condition. All primary components (deck, superstructure, substructure, or culvert) are rated 7 or higher. No significant problems were noted. The last reported inspection was in January 2024.
How much traffic does Industry RD over Mill Branch carry?
About 60 vehicles per day (2022 count), of which roughly 3% are trucks.
How long is Industry RD over Mill Branch?
The structure is 29 ft (8.8 m) long with a longest span of 29 ft (8.8 m) and a deck 26 ft wide.
Who owns Industry RD over Mill Branch?
It is owned by the County Highway Agency.