US Bridges

FAP 48 over Brushy Fork Creek

Fair

Hickman County, Tennessee · 1.7 Mile South of SR100 · Structure no. 41SR0480007

Built
1975
50 years old
Condition
Fair
inspected August 2024
Type
Box Beam or Girders - Single or Spread
Prestressed Concrete Continuous
Length
110 ft
3 main spans
Daily traffic
1,863
2021 count
Owner
State
State Highway Agency

About this bridge

FAP 48 over Brushy Fork Creek is a prestressed concrete continuous box beam or girders - single or spread carrying FAP 48 over Brushy Fork Creek in Hickman County, Tennessee. It was built in 1975, so it is 50 years old, older than the Tennessee average of 47.4 years.

The most recent inspection reported to the Federal Highway Administration rates it in fair condition with a lowest component rating of 5 out of 9. The lowest-rated primary component is rated 5 or 6. Minor deterioration is present but the structure is sound.

It carries about 1,863 vehicles a day, roughly 5% of them trucks, projected to reach 2,981 by 2042. The structure is 110 ft (33.5 m) long and 40 ft wide. If it were closed, the detour would be 34.8 mi (56 km).

CarriesFAP 48
CrossesBrushy Fork Creek
Location1.7 Mile South of SR100
RouteState Highway 48
Coordinates35.68087, -87.50228
Functional classRural Minor Arterial

Condition and inspection

Fair

The lowest-rated primary component is rated 5 or 6. Minor deterioration is present but the structure is sound.

ComponentRatingMeaning
Deck5 FairAll primary structural elements are sound but may have minor section loss, cracking, spalling or scour.
Superstructure7 GoodSome minor problems.
Substructure6 SatisfactoryStructural elements show some minor deterioration.
Channel and channel protection7 GoodSome minor problems.
Last inspectionAugust 2024
Inspection intervalevery 24 months
Operating statusOpen, no restriction
ScourFoundations stable; scour above top of footing
Structural evaluation6: Equal to present minimum criteria
Deck geometry6: Equal to present minimum criteria
Waterway adequacy6: Equal to present minimum criteria
Approach roadway alignment8: Equal to present desirable criteria
Operating rating47.5 US tons
Inventory rating31.7 US tons

Structure

MaterialPrestressed Concrete Continuous
DeckConcrete, cast-in-place
Main spans3
Design loadHS 20
Structure length110 ft (33.5 m)
Longest span36 ft (11 m)
Deck width40 ft (12.2 m)
Roadway width38 ft (11.6 m)
Vertical clearance over deckUnrestricted

Traffic and service

Average daily traffic1,863 (2021)
Projected traffic2,981 by 2042
Trucks5%
Lanes on structure2
Traffic directionTwo-way traffic
CarriesHighway
CrossesWaterway
Detour if closed34.8 mi (56 km)
TollOn a free road
National Highway SystemNo

Ownership and planned work

OwnerState Highway Agency
Maintained byState Highway Agency
Historic statusHistorical significance not determinable at this time
Work proposedNone recorded
Estimated improvement cost—
NavigationNo navigation control on waterway

Frequently asked questions

When was FAP 48 over Brushy Fork Creek built?

It was built in 1975, making it 50 years old in 2025.

What condition is FAP 48 over Brushy Fork Creek in?

The National Bridge Inventory rates it in fair condition. The lowest-rated primary component is rated 5 or 6. Minor deterioration is present but the structure is sound. The last reported inspection was in August 2024.

How much traffic does FAP 48 over Brushy Fork Creek carry?

About 1,863 vehicles per day (2021 count), of which roughly 5% are trucks.

How long is FAP 48 over Brushy Fork Creek?

The structure is 110 ft (33.5 m) long with a longest span of 36 ft (11 m) and a deck 40 ft wide.

Who owns FAP 48 over Brushy Fork Creek?

It is owned by the State Highway Agency.