US Bridges

FAP 1 over Briar Fork Creek

Good

Grainger County, Tennessee · .9 M E of Tate Springs · Structure no. 29SR0010031

Built
1998
27 years old
Condition
Good
inspected April 2024
Type
Stringer/Multi-beam or Girder
Concrete
Length
241 ft
3 main spans
Daily traffic
5,584
2021 count
Owner
State
State Highway Agency

About this bridge

FAP 1 over Briar Fork Creek is a concrete stringer/multi-beam or girder carrying FAP 1 over Briar Fork Creek in Grainger County, Tennessee. It was built in 1998, so it is 27 years old, younger than the Tennessee average of 47.4 years.

The most recent inspection reported to the Federal Highway Administration rates it in good condition with a lowest component rating of 7 out of 9. All primary components (deck, superstructure, substructure, or culvert) are rated 7 or higher. No significant problems were noted.

It carries about 5,584 vehicles a day, roughly 5% of them trucks, projected to reach 8,934 by 2042. The structure is 241 ft (73.5 m) long and 44 ft wide. If it were closed, the detour would be 49.7 mi (80 km).

CarriesFAP 1
CrossesBriar Fork Creek
Location.9 M E of Tate Springs
RouteU.S. Route 11
Coordinates36.34234, -83.33643
Functional classRural Minor Arterial

Condition and inspection

Good

All primary components (deck, superstructure, substructure, or culvert) are rated 7 or higher. No significant problems were noted.

ComponentRatingMeaning
Deck7 GoodSome minor problems.
Superstructure7 GoodSome minor problems.
Substructure7 GoodSome minor problems.
Channel and channel protection7 GoodSome minor problems.
Last inspectionApril 2024
Inspection intervalevery 24 months
Operating statusOpen, no restriction
ScourFoundations stable; scour above top of footing
Structural evaluation7: Better than present minimum criteria
Deck geometry7: Better than present minimum criteria
Waterway adequacy8: Equal to present desirable criteria
Approach roadway alignment8: Equal to present desirable criteria
Operating rating98.2 US tons
Inventory rating35.7 US tons

Structure

MaterialConcrete
DeckConcrete, cast-in-place
Main spans3
Design loadHS 20
Structure length241 ft (73.5 m)
Longest span80 ft (24.5 m)
Deck width44 ft (13.4 m)
Roadway width40 ft (12.3 m)
Vertical clearance over deckUnrestricted

Traffic and service

Average daily traffic5,584 (2021)
Projected traffic8,934 by 2042
Trucks5%
Lanes on structure2
Traffic directionOne-way traffic
CarriesHighway
CrossesWaterway
Detour if closed49.7 mi (80 km)
TollOn a free road
National Highway SystemNo

Ownership and planned work

OwnerState Highway Agency
Maintained byState Highway Agency
Historic statusNot eligible for the National Register of Historic Places
Work proposedNone recorded
Estimated improvement cost—
NavigationNo navigation control on waterway

Frequently asked questions

When was FAP 1 over Briar Fork Creek built?

It was built in 1998, making it 27 years old in 2025.

What condition is FAP 1 over Briar Fork Creek in?

The National Bridge Inventory rates it in good condition. All primary components (deck, superstructure, substructure, or culvert) are rated 7 or higher. No significant problems were noted. The last reported inspection was in April 2024.

How much traffic does FAP 1 over Briar Fork Creek carry?

About 5,584 vehicles per day (2021 count), of which roughly 5% are trucks.

How long is FAP 1 over Briar Fork Creek?

The structure is 241 ft (73.5 m) long with a longest span of 80 ft (24.5 m) and a deck 44 ft wide.

Who owns FAP 1 over Briar Fork Creek?

It is owned by the State Highway Agency.