US Bridges

Billings Mill RD over Billings Mill Brook

Good

Wyoming County, Pennsylvania · Tunkhannock Tp JCT SR1002 · Structure no. 000000000052748

Built
2015
10 years old
Condition
Good
inspected May 2023
Type
Box Beam or Girders - Multiple
Prestressed Concrete
Length
47 ft
1 main span
Daily traffic
951
2024 count
Owner
State
State Highway Agency

About this bridge

Billings Mill RD over Billings Mill Brook is a prestressed concrete box beam or girders - multiple carrying Billings Mill RD over Billings Mill Brook in Wyoming County, Pennsylvania. It was built in 2015, so it is 10 years old, younger than the Pennsylvania average of 54.8 years.

The most recent inspection reported to the Federal Highway Administration rates it in good condition with a lowest component rating of 8 out of 9. All primary components (deck, superstructure, substructure, or culvert) are rated 7 or higher. No significant problems were noted.

It carries about 951 vehicles a day, roughly 10% of them trucks, projected to reach 1,132 by 2037. The structure is 47 ft (14.3 m) long and 28 ft wide. If it were closed, the detour would be 3.7 mi (6 km).

CarriesBillings Mill RD
CrossesBillings Mill Brook
LocationTunkhannock Tp JCT SR1002
RouteState Highway 0
Coordinates41.5801, -75.91659
Functional classRural Local

Condition and inspection

Good

All primary components (deck, superstructure, substructure, or culvert) are rated 7 or higher. No significant problems were noted.

ComponentRatingMeaning
Deck9 ExcellentNo problems noted.
Superstructure8 Very GoodNo problems noted.
Substructure8 Very GoodNo problems noted.
Channel and channel protection9 ExcellentNo problems noted.
Last inspectionMay 2023
Inspection intervalevery 24 months
Operating statusOpen, no restriction
ScourFoundations stable; scour above top of footing
Structural evaluation8: Equal to present desirable criteria
Deck geometry5: Somewhat better than minimum adequacy to tolerate being left in place as is
Waterway adequacy9: Superior to present desirable criteria
Approach roadway alignment5: Somewhat better than minimum adequacy to tolerate being left in place as is
Operating rating52.5 US tons
Inventory rating40.7 US tons

Structure

MaterialPrestressed Concrete
DeckConcrete, cast-in-place
Main spans1
Design loadHL 93
Structure length47 ft (14.3 m)
Longest span45 ft (13.7 m)
Deck width28 ft (8.5 m)
Roadway width26 ft (7.9 m)
Vertical clearance over deckUnrestricted

Traffic and service

Average daily traffic951 (2024)
Projected traffic1,132 by 2037
Trucks10%
Lanes on structure2
Traffic directionTwo-way traffic
CarriesHighway
CrossesWaterway
Detour if closed3.7 mi (6 km)
TollOn a free road
National Highway SystemNo

Ownership and planned work

OwnerState Highway Agency
Maintained byPrivate (other than railroad)
Historic statusNot eligible for the National Register of Historic Places
Work proposedNone recorded
Estimated improvement cost—
NavigationNo navigation control on waterway

Frequently asked questions

When was Billings Mill RD over Billings Mill Brook built?

It was built in 2015, making it 10 years old in 2025.

What condition is Billings Mill RD over Billings Mill Brook in?

The National Bridge Inventory rates it in good condition. All primary components (deck, superstructure, substructure, or culvert) are rated 7 or higher. No significant problems were noted. The last reported inspection was in May 2023.

How much traffic does Billings Mill RD over Billings Mill Brook carry?

About 951 vehicles per day (2024 count), of which roughly 10% are trucks.

How long is Billings Mill RD over Billings Mill Brook?

The structure is 47 ft (14.3 m) long with a longest span of 45 ft (13.7 m) and a deck 28 ft wide.

Who owns Billings Mill RD over Billings Mill Brook?

It is owned by the State Highway Agency and maintained by the Private (other than railroad).