US Bridges

SR 309 Bypass over Butler Pike

Good

Montgomery County, Pennsylvania · Upper Dublin 3257H04 · Structure no. 000000000027389

Built
1958
67 years old, rebuilt 2010
Condition
Good
inspected August 2022
Type
Stringer/Multi-beam or Girder
Steel Continuous
Length
148 ft
3 main spans
Daily traffic
59,007
2024 count
Owner
State
State Highway Agency

About this bridge

SR 309 Bypass over Butler Pike is a steel continuous stringer/multi-beam or girder carrying SR 309 Bypass over Butler Pike in Montgomery County, Pennsylvania. It was built in 1958 and reconstructed in 2010, so it is 67 years old, older than the Pennsylvania average of 54.8 years.

The most recent inspection reported to the Federal Highway Administration rates it in good condition with a lowest component rating of 7 out of 9. All primary components (deck, superstructure, substructure, or culvert) are rated 7 or higher. No significant problems were noted.

It carries about 59,007 vehicles a day, roughly 5% of them trucks, projected to reach 71,414 by 2032. The structure is 148 ft (45.1 m) long and 93 ft wide. If it were closed, the detour would be 3.1 mi (5 km).

CarriesSR 309 Bypass
CrossesButler Pike
LocationUpper Dublin 3257H04
RouteState Highway 309
Coordinates40.167, -75.20445
Functional classUrban Principal Arterial - Other Freeway or Expressway

Condition and inspection

Good

All primary components (deck, superstructure, substructure, or culvert) are rated 7 or higher. No significant problems were noted.

ComponentRatingMeaning
Deck7 GoodSome minor problems.
Superstructure7 GoodSome minor problems.
Substructure7 GoodSome minor problems.
Last inspectionAugust 2022
Inspection intervalevery 48 months
Operating statusOpen, no restriction
ScourBridge not over waterway
Structural evaluation7: Better than present minimum criteria
Deck geometry9: Superior to present desirable criteria
Approach roadway alignment8: Equal to present desirable criteria
Operating rating110.1 US tons
Inventory rating73 US tons

Structure

MaterialSteel Continuous
DeckConcrete, cast-in-place
Main spans3
Design loadHS 25 or greater
Structure length148 ft (45.1 m)
Longest span72 ft (21.9 m)
Deck width93 ft (28.3 m)
Roadway width87 ft (26.5 m)
Vertical clearance over deckUnrestricted

Traffic and service

Average daily traffic59,007 (2024)
Projected traffic71,414 by 2032
Trucks5%
Lanes on structure3
Traffic directionTwo-way traffic
CarriesHighway
CrossesHighway
Detour if closed3.1 mi (5 km)
TollOn a free road
National Highway SystemYes

Ownership and planned work

OwnerState Highway Agency
Maintained byState Highway Agency
Historic statusNot eligible for the National Register of Historic Places
Work proposedRehabilitation because of general structure deterioration or inadequate strength
Estimated improvement cost$373,000
NavigationNot applicable (no waterway)

Frequently asked questions

When was SR 309 Bypass over Butler Pike built?

It was built in 1958, making it 67 years old in 2025. It was reconstructed in 2010.

What condition is SR 309 Bypass over Butler Pike in?

The National Bridge Inventory rates it in good condition. All primary components (deck, superstructure, substructure, or culvert) are rated 7 or higher. No significant problems were noted. The last reported inspection was in August 2022.

How much traffic does SR 309 Bypass over Butler Pike carry?

About 59,007 vehicles per day (2024 count), of which roughly 5% are trucks.

How long is SR 309 Bypass over Butler Pike?

The structure is 148 ft (45.1 m) long with a longest span of 72 ft (21.9 m) and a deck 93 ft wide.

Who owns SR 309 Bypass over Butler Pike?

It is owned by the State Highway Agency.