US Bridges

Stony Hill Road over Beaver Creek

Good

Lancaster County, Pennsylvania · Camargo · Structure no. 000000000053624

Built
2016
9 years old
Condition
Good
inspected June 2024
Type
Box Beam or Girders - Multiple
Prestressed Concrete
Length
50 ft
1 main span
Daily traffic
915
2024 count
Owner
State
State Highway Agency

About this bridge

Stony Hill Road over Beaver Creek is a prestressed concrete box beam or girders - multiple carrying Stony Hill Road over Beaver Creek in Lancaster County, Pennsylvania. It was built in 2016, so it is 9 years old, younger than the Pennsylvania average of 54.8 years.

The most recent inspection reported to the Federal Highway Administration rates it in good condition with a lowest component rating of 8 out of 9. All primary components (deck, superstructure, substructure, or culvert) are rated 7 or higher. No significant problems were noted.

It carries about 915 vehicles a day, roughly 13% of them trucks, projected to reach 992 by 2037. The structure is 50 ft (15.2 m) long and 30 ft wide. If it were closed, the detour would be 1.9 mi (3 km).

CarriesStony Hill Road
CrossesBeaver Creek
LocationCamargo
RouteState Highway 0
Coordinates39.91725, -76.17448
Functional classRural Local

Condition and inspection

Good

All primary components (deck, superstructure, substructure, or culvert) are rated 7 or higher. No significant problems were noted.

ComponentRatingMeaning
Deck8 Very GoodNo problems noted.
Superstructure9 ExcellentNo problems noted.
Substructure9 ExcellentNo problems noted.
Channel and channel protection8 Very GoodNo problems noted.
Last inspectionJune 2024
Inspection intervalevery 24 months
Operating statusOpen, no restriction
ScourFoundations stable; scour above top of footing
Structural evaluation9: Superior to present desirable criteria
Deck geometry5: Somewhat better than minimum adequacy to tolerate being left in place as is
Waterway adequacy7: Better than present minimum criteria
Approach roadway alignment8: Equal to present desirable criteria
Operating rating51.8 US tons
Inventory rating40 US tons

Structure

MaterialPrestressed Concrete
DeckConcrete, cast-in-place
Main spans1
Design loadHL 93
Structure length50 ft (15.2 m)
Longest span46 ft (14 m)
Deck width30 ft (9.1 m)
Roadway width28 ft (8.5 m)
Vertical clearance over deckUnrestricted

Traffic and service

Average daily traffic915 (2024)
Projected traffic992 by 2037
Trucks13%
Lanes on structure2
Traffic directionTwo-way traffic
CarriesHighway
CrossesWaterway
Detour if closed1.9 mi (3 km)
TollOn a free road
National Highway SystemNo

Ownership and planned work

OwnerState Highway Agency
Maintained byPrivate (other than railroad)
Historic statusNot eligible for the National Register of Historic Places
Work proposedNone recorded
Estimated improvement cost—
NavigationNo navigation control on waterway

Frequently asked questions

When was Stony Hill Road over Beaver Creek built?

It was built in 2016, making it 9 years old in 2025.

What condition is Stony Hill Road over Beaver Creek in?

The National Bridge Inventory rates it in good condition. All primary components (deck, superstructure, substructure, or culvert) are rated 7 or higher. No significant problems were noted. The last reported inspection was in June 2024.

How much traffic does Stony Hill Road over Beaver Creek carry?

About 915 vehicles per day (2024 count), of which roughly 13% are trucks.

How long is Stony Hill Road over Beaver Creek?

The structure is 50 ft (15.2 m) long with a longest span of 46 ft (14 m) and a deck 30 ft wide.

Who owns Stony Hill Road over Beaver Creek?

It is owned by the State Highway Agency and maintained by the Private (other than railroad).