US Bridges

Speedwell Forge RD over Hammer Creek

Good

Lancaster County, Pennsylvania · 2 Mi.Sw of Brickerville · Structure no. 000000000053596

Built
2016
9 years old
Condition
Good
inspected June 2024
Type
Box Beam or Girders - Multiple
Prestressed Concrete
Length
58 ft
1 main span
Daily traffic
370
2023 count
Owner
State
State Highway Agency

About this bridge

Speedwell Forge RD over Hammer Creek is a prestressed concrete box beam or girders - multiple carrying Speedwell Forge RD over Hammer Creek in Lancaster County, Pennsylvania. It was built in 2016, so it is 9 years old, younger than the Pennsylvania average of 54.8 years.

The most recent inspection reported to the Federal Highway Administration rates it in good condition with a lowest component rating of 8 out of 9. All primary components (deck, superstructure, substructure, or culvert) are rated 7 or higher. No significant problems were noted.

It carries about 370 vehicles a day, roughly 1% of them trucks, projected to reach 547 by 2037. The structure is 58 ft (17.7 m) long and 30 ft wide. If it were closed, the detour would be 3.1 mi (5 km).

CarriesSpeedwell Forge RD
CrossesHammer Creek
Location2 Mi.Sw of Brickerville
RouteState Highway 0
Coordinates40.22766, -76.33515
Functional classRural Minor Collector

Condition and inspection

Good

All primary components (deck, superstructure, substructure, or culvert) are rated 7 or higher. No significant problems were noted.

ComponentRatingMeaning
Deck8 Very GoodNo problems noted.
Superstructure8 Very GoodNo problems noted.
Substructure8 Very GoodNo problems noted.
Channel and channel protection8 Very GoodNo problems noted.
Last inspectionJune 2024
Inspection intervalevery 24 months
Operating statusOpen, no restriction
ScourFoundations stable; scour above top of footing
Structural evaluation8: Equal to present desirable criteria
Deck geometry6: Equal to present minimum criteria
Waterway adequacy8: Equal to present desirable criteria
Approach roadway alignment8: Equal to present desirable criteria
Operating rating57.5 US tons
Inventory rating44.3 US tons

Structure

MaterialPrestressed Concrete
DeckConcrete, cast-in-place
Main spans1
Design loadHL 93
Structure length58 ft (17.7 m)
Longest span53 ft (16.2 m)
Deck width30 ft (9.1 m)
Roadway width28 ft (8.5 m)
Vertical clearance over deckUnrestricted

Traffic and service

Average daily traffic370 (2023)
Projected traffic547 by 2037
Trucks1%
Lanes on structure2
Traffic directionTwo-way traffic
CarriesHighway
CrossesWaterway
Detour if closed3.1 mi (5 km)
TollOn a free road
National Highway SystemNo

Ownership and planned work

OwnerState Highway Agency
Maintained byPrivate (other than railroad)
Historic statusNot eligible for the National Register of Historic Places
Work proposedNone recorded
Estimated improvement cost—
NavigationNo navigation control on waterway

Frequently asked questions

When was Speedwell Forge RD over Hammer Creek built?

It was built in 2016, making it 9 years old in 2025.

What condition is Speedwell Forge RD over Hammer Creek in?

The National Bridge Inventory rates it in good condition. All primary components (deck, superstructure, substructure, or culvert) are rated 7 or higher. No significant problems were noted. The last reported inspection was in June 2024.

How much traffic does Speedwell Forge RD over Hammer Creek carry?

About 370 vehicles per day (2023 count), of which roughly 1% are trucks.

How long is Speedwell Forge RD over Hammer Creek?

The structure is 58 ft (17.7 m) long with a longest span of 53 ft (16.2 m) and a deck 30 ft wide.

Who owns Speedwell Forge RD over Hammer Creek?

It is owned by the State Highway Agency and maintained by the Private (other than railroad).