US Bridges

SR 4010 over Roaring Run

Good

Fulton County, Pennsylvania · 1 Mile NW of Enid · Structure no. 000000000042853

Built
2005
20 years old
Condition
Good
inspected December 2023
Type
Culvert
Concrete
Length
21 ft
1 main span
Daily traffic
129
2024 count
Owner
State
State Highway Agency

About this bridge

SR 4010 over Roaring Run is a concrete culvert carrying SR 4010 over Roaring Run in Fulton County, Pennsylvania. It was built in 2005, so it is 20 years old, younger than the Pennsylvania average of 54.8 years.

The most recent inspection reported to the Federal Highway Administration rates it in good condition with a lowest component rating of 8 out of 9. All primary components (deck, superstructure, substructure, or culvert) are rated 7 or higher. No significant problems were noted.

It carries about 129 vehicles a day, roughly 2% of them trucks, projected to reach 119 by 2032. The structure is 21 ft (6.4 m) long and 38 ft wide. If it were closed, the detour would be 14.9 mi (24 km).

Location

Open in Google Maps
CarriesSR 4010
CrossesRoaring Run
Location1 Mile NW of Enid
RouteState Highway 0
CountyFulton County
StatePennsylvania
Coordinates40.11159, -78.1323
Functional classRural Minor Collector

Condition and inspection

Good

All primary components (deck, superstructure, substructure, or culvert) are rated 7 or higher. No significant problems were noted.

ComponentRatingMeaning
Channel and channel protection6 SatisfactoryStructural elements show some minor deterioration.
Culvert8 Very GoodNo problems noted.
Last inspectionDecember 2023
Inspection intervalevery 48 months
Operating statusOpen, no restriction
ScourFoundations stable; scour above top of footing
Structural evaluation8: Equal to present desirable criteria
Deck geometry5: Somewhat better than minimum adequacy to tolerate being left in place as is
Waterway adequacy7: Better than present minimum criteria
Approach roadway alignment8: Equal to present desirable criteria
Operating rating99 US tons
Inventory rating59 US tons

Structure

Structure typeCulvert
MaterialConcrete
DeckNot applicable
Main spans1
Design loadHL 93
Structure length21 ft (6.4 m)
Longest span20 ft (6.1 m)
Deck width38 ft (11.6 m)
Roadway width24 ft (7.3 m)
Vertical clearance over deckUnrestricted

Traffic and service

Average daily traffic129 (2024)
Projected traffic119 by 2032
Trucks2%
Lanes on structure2
Traffic directionTwo-way traffic
CarriesHighway
CrossesWaterway
Detour if closed14.9 mi (24 km)
TollOn a free road
National Highway SystemNo

Ownership and planned work

OwnerState Highway Agency
Maintained byState Highway Agency
Historic statusNot eligible for the National Register of Historic Places
Work proposedNone recorded
Estimated improvement cost—
NavigationNo navigation control on waterway

Frequently asked questions

When was SR 4010 over Roaring Run built?

It was built in 2005, making it 20 years old in 2025.

What condition is SR 4010 over Roaring Run in?

The National Bridge Inventory rates it in good condition. All primary components (deck, superstructure, substructure, or culvert) are rated 7 or higher. No significant problems were noted. The last reported inspection was in December 2023.

How much traffic does SR 4010 over Roaring Run carry?

About 129 vehicles per day (2024 count), of which roughly 2% are trucks.

How long is SR 4010 over Roaring Run?

The structure is 21 ft (6.4 m) long with a longest span of 20 ft (6.1 m) and a deck 38 ft wide.

Who owns SR 4010 over Roaring Run?

It is owned by the State Highway Agency.