US Bridges

Edges Mill Road over Branch Beaver Creek

Poor

Chester County, Pennsylvania · Near Edge Mill 30C1 · Structure no. 000000000010605

Built
1974
51 years old
Condition
Poor
inspected August 2024
Type
Culvert
Concrete
Length
23 ft
1 main span
Daily traffic
1,979
2024 count
Owner
State
State Highway Agency

About this bridge

Edges Mill Road over Branch Beaver Creek is a concrete culvert carrying Edges Mill Road over Branch Beaver Creek in Chester County, Pennsylvania. It was built in 1974, so it is 51 years old, younger than the Pennsylvania average of 54.8 years.

The most recent inspection reported to the Federal Highway Administration rates it in poor condition with a lowest component rating of 3 out of 9. The lowest-rated primary component is rated 4 or below, indicating advanced deterioration. Poor does not mean unsafe; such bridges are inspected more often and may carry load restrictions.

It carries about 1,979 vehicles a day, roughly 12% of them trucks, projected to reach 3,014 by 2032. The structure is 23 ft (7 m) long. If it were closed, the detour would be 3.1 mi (5 km).

CarriesEdges Mill Road
CrossesBranch Beaver Creek
LocationNear Edge Mill 30C1
RouteState Highway 0
Coordinates40.01264, -75.73205
Functional classUrban Collector

Condition and inspection

Poor

The lowest-rated primary component is rated 4 or below, indicating advanced deterioration. Poor does not mean unsafe; such bridges are inspected more often and may carry load restrictions.

ComponentRatingMeaning
Channel and channel protection3 SeriousLoss of section, deterioration, spalling or scour have seriously affected primary structural components.
Culvert3 SeriousLoss of section, deterioration, spalling or scour have seriously affected primary structural components.
Last inspectionAugust 2024
Inspection intervalevery 12 months
Operating statusOpen, no restriction
ScourFoundations stable; scour above top of footing
Structural evaluation3: Basically intolerable, requiring high priority of corrective action
Waterway adequacy7: Better than present minimum criteria
Approach roadway alignment8: Equal to present desirable criteria
Operating rating71 US tons
Inventory rating43 US tons

Structure

Structure typeCulvert
MaterialConcrete
DeckNot applicable
Main spans1
Design loadHS 20
Structure length23 ft (7 m)
Longest span23 ft (7 m)
Deck width0 ft (0 m)
Roadway width0 ft (0 m)
Vertical clearance over deckUnrestricted

Traffic and service

Average daily traffic1,979 (2024)
Projected traffic3,014 by 2032
Trucks12%
Lanes on structure2
Traffic directionTwo-way traffic
CarriesHighway
CrossesWaterway
Detour if closed3.1 mi (5 km)
TollOn a free road
National Highway SystemNo

Ownership and planned work

OwnerState Highway Agency
Maintained byState Highway Agency
Historic statusNot eligible for the National Register of Historic Places
Work proposedNone recorded
Estimated improvement cost—
NavigationNo navigation control on waterway

Frequently asked questions

When was Edges Mill Road over Branch Beaver Creek built?

It was built in 1974, making it 51 years old in 2025.

What condition is Edges Mill Road over Branch Beaver Creek in?

The National Bridge Inventory rates it in poor condition. The lowest-rated primary component is rated 4 or below, indicating advanced deterioration. Poor does not mean unsafe; such bridges are inspected more often and may carry load restrictions. The last reported inspection was in August 2024.

How much traffic does Edges Mill Road over Branch Beaver Creek carry?

About 1,979 vehicles per day (2024 count), of which roughly 12% are trucks.

How long is Edges Mill Road over Branch Beaver Creek?

The structure is 23 ft (7 m) long with a longest span of 23 ft (7 m).

Who owns Edges Mill Road over Branch Beaver Creek?

It is owned by the State Highway Agency.