US Bridges

Mermon Ave over Nesquehoning Creek

Fair

Carbon County, Pennsylvania · Mermon Ave · Structure no. 000000000009142

Built
1950
75 years old
Condition
Fair
inspected October 2023
Type
Stringer/Multi-beam or Girder
Steel
Length
67 ft
1 main span
Daily traffic
1,400
1999 count
Owner
City
City or Municipal Highway Agency

About this bridge

Mermon Ave over Nesquehoning Creek is a steel stringer/multi-beam or girder carrying Mermon Ave over Nesquehoning Creek in Carbon County, Pennsylvania. It was built in 1950, so it is 75 years old, older than the Pennsylvania average of 54.8 years.

The most recent inspection reported to the Federal Highway Administration rates it in fair condition with a lowest component rating of 5 out of 9. The lowest-rated primary component is rated 5 or 6. Minor deterioration is present but the structure is sound.

It carries about 1,400 vehicles a day, roughly 1% of them trucks, projected to reach 1,540 by 2019. The structure is 67 ft (20.4 m) long and 45 ft wide. If it were closed, the detour would be 98.8 mi (159 km).

CarriesMermon Ave
CrossesNesquehoning Creek
LocationMermon Ave
RouteCity Street 0
Coordinates40.86697, -75.81324
Functional classUrban Local

Condition and inspection

Fair

The lowest-rated primary component is rated 5 or 6. Minor deterioration is present but the structure is sound.

ComponentRatingMeaning
Deck6 SatisfactoryStructural elements show some minor deterioration.
Superstructure5 FairAll primary structural elements are sound but may have minor section loss, cracking, spalling or scour.
Substructure6 SatisfactoryStructural elements show some minor deterioration.
Channel and channel protection5 FairAll primary structural elements are sound but may have minor section loss, cracking, spalling or scour.
Last inspectionOctober 2023
Inspection intervalevery 24 months
Operating statusOpen, no restriction
ScourFoundations stable; action required to protect exposed foundations
Structural evaluation5: Somewhat better than minimum adequacy to tolerate being left in place as is
Deck geometry6: Equal to present minimum criteria
Waterway adequacy5: Somewhat better than minimum adequacy to tolerate being left in place as is
Approach roadway alignment7: Better than present minimum criteria
Operating rating43 US tons
Inventory rating26 US tons

Structure

MaterialSteel
DeckConcrete, cast-in-place
Main spans1
Design loadHS 20
Structure length67 ft (20.4 m)
Longest span65 ft (19.8 m)
Deck width45 ft (13.8 m)
Roadway width38 ft (11.6 m)
Vertical clearance over deckUnrestricted

Traffic and service

Average daily traffic1,400 (1999)
Projected traffic1,540 by 2019
Trucks1%
Lanes on structure2
Traffic directionTwo-way traffic
CarriesHighway and pedestrian
CrossesWaterway
Detour if closed98.8 mi (159 km)
TollOn a free road
National Highway SystemNo

Ownership and planned work

OwnerCity or Municipal Highway Agency
Maintained byCity or Municipal Highway Agency
Historic statusNot eligible for the National Register of Historic Places
Work proposedNone recorded
Estimated improvement cost—
NavigationNo navigation control on waterway

Frequently asked questions

When was Mermon Ave over Nesquehoning Creek built?

It was built in 1950, making it 75 years old in 2025.

What condition is Mermon Ave over Nesquehoning Creek in?

The National Bridge Inventory rates it in fair condition. The lowest-rated primary component is rated 5 or 6. Minor deterioration is present but the structure is sound. The last reported inspection was in October 2023.

How much traffic does Mermon Ave over Nesquehoning Creek carry?

About 1,400 vehicles per day (1999 count), of which roughly 1% are trucks.

How long is Mermon Ave over Nesquehoning Creek?

The structure is 67 ft (20.4 m) long with a longest span of 65 ft (19.8 m) and a deck 45 ft wide.

Who owns Mermon Ave over Nesquehoning Creek?

It is owned by the City or Municipal Highway Agency.