US Bridges

Bakerstown Road over B&le RR

Good

Allegheny County, Pennsylvania · @ Intersection W/ SR 1013 · Structure no. 000000000053645

Built
2016
9 years old
Condition
Good
inspected January 2021
Type
Stringer/Multi-beam or Girder
Steel
Length
133 ft
1 main span
Daily traffic
5,773
2024 count
Owner
State
State Highway Agency

About this bridge

Bakerstown Road over B&le RR is a steel stringer/multi-beam or girder carrying Bakerstown Road over B&le RR in Allegheny County, Pennsylvania. It was built in 2016, so it is 9 years old, younger than the Pennsylvania average of 54.8 years.

The most recent inspection reported to the Federal Highway Administration rates it in good condition with a lowest component rating of 8 out of 9. All primary components (deck, superstructure, substructure, or culvert) are rated 7 or higher. No significant problems were noted.

It carries about 5,773 vehicles a day, roughly 9% of them trucks, projected to reach 5,009 by 2032. The structure is 133 ft (40.5 m) long and 42 ft wide. If it were closed, the detour would be 6.2 mi (10 km).

Location

Open in Google Maps
CarriesBakerstown Road
CrossesB&le RR
Location@ Intersection W/ SR 1013
RouteState Highway 0
CountyAllegheny County
StatePennsylvania
Coordinates40.65379, -79.83841
Functional classUrban Minor Arterial

Condition and inspection

Good

All primary components (deck, superstructure, substructure, or culvert) are rated 7 or higher. No significant problems were noted.

ComponentRatingMeaning
Deck8 Very GoodNo problems noted.
Superstructure8 Very GoodNo problems noted.
Substructure8 Very GoodNo problems noted.
Last inspectionJanuary 2021
Inspection intervalevery 48 months
Operating statusOpen, no restriction
ScourBridge not over waterway
Structural evaluation8: Equal to present desirable criteria
Deck geometry4: Meets minimum tolerable limits to be left in place as is
Approach roadway alignment7: Better than present minimum criteria
Operating rating61.8 US tons
Inventory rating47.5 US tons

Structure

Structure typeStringer/Multi-beam or Girder
MaterialSteel
DeckConcrete, cast-in-place
Main spans1
Design loadHL 93
Structure length133 ft (40.5 m)
Longest span128 ft (39 m)
Deck width42 ft (12.8 m)
Roadway width34 ft (10.4 m)
Vertical clearance over deckUnrestricted

Traffic and service

Average daily traffic5,773 (2024)
Projected traffic5,009 by 2032
Trucks9%
Lanes on structure2
Traffic directionTwo-way traffic
CarriesHighway and pedestrian
CrossesRailroad
Detour if closed6.2 mi (10 km)
TollOn a free road
National Highway SystemNo

Ownership and planned work

OwnerState Highway Agency
Maintained byState Highway Agency
Historic statusNot eligible for the National Register of Historic Places
Work proposedNone recorded
Estimated improvement cost—
NavigationNot applicable (no waterway)

Frequently asked questions

When was Bakerstown Road over B&le RR built?

It was built in 2016, making it 9 years old in 2025.

What condition is Bakerstown Road over B&le RR in?

The National Bridge Inventory rates it in good condition. All primary components (deck, superstructure, substructure, or culvert) are rated 7 or higher. No significant problems were noted. The last reported inspection was in January 2021.

How much traffic does Bakerstown Road over B&le RR carry?

About 5,773 vehicles per day (2024 count), of which roughly 9% are trucks.

How long is Bakerstown Road over B&le RR?

The structure is 133 ft (40.5 m) long with a longest span of 128 ft (39 m) and a deck 42 ft wide.

Who owns Bakerstown Road over B&le RR?

It is owned by the State Highway Agency.