US Bridges

Bakeoven RD over Bakeoven Creek

Good

Wasco County, Oregon · 00.25 MI NE Maupin Ore · Structure no. 06567 000 00025

Built
1952
73 years old
Condition
Good
inspected August 2024
Type
Tee Beam
Concrete Continuous
Length
100 ft
3 main spans
Daily traffic
151
2020 count
Owner
County
County Highway Agency

About this bridge

Bakeoven RD over Bakeoven Creek is a concrete continuous tee beam carrying Bakeoven RD over Bakeoven Creek in Wasco County, Oregon. It was built in 1952, so it is 73 years old, older than the Oregon average of 49.9 years.

The most recent inspection reported to the Federal Highway Administration rates it in good condition with a lowest component rating of 7 out of 9. All primary components (deck, superstructure, substructure, or culvert) are rated 7 or higher. No significant problems were noted.

It carries about 151 vehicles a day, roughly 15% of them trucks, projected to reach 171 by 2025. The structure is 100 ft (30.5 m) long and 29 ft wide. If it were closed, the detour would be 26.1 mi (42 km).

CarriesBakeoven RD
CrossesBakeoven Creek
Location00.25 MI NE Maupin Ore
RouteCounty Highway 0
StateOregon
Coordinates45.17326, -121.0731
Functional classRural Major Collector

Condition and inspection

Good

All primary components (deck, superstructure, substructure, or culvert) are rated 7 or higher. No significant problems were noted.

ComponentRatingMeaning
Deck7 GoodSome minor problems.
Superstructure7 GoodSome minor problems.
Substructure7 GoodSome minor problems.
Channel and channel protection6 SatisfactoryStructural elements show some minor deterioration.
Last inspectionAugust 2024
Inspection intervalevery 24 months
Operating statusOpen, no restriction
ScourScour critical; foundations unstable for calculated scour conditions
Structural evaluation6: Equal to present minimum criteria
Deck geometry5: Somewhat better than minimum adequacy to tolerate being left in place as is
Waterway adequacy8: Equal to present desirable criteria
Approach roadway alignment6: Equal to present minimum criteria
Operating rating30.8 US tons
Inventory rating23.9 US tons

Structure

Structure typeTee Beam
MaterialConcrete Continuous
DeckConcrete, cast-in-place
Main spans3
Design loadH 15
Structure length100 ft (30.5 m)
Longest span40 ft (12.2 m)
Deck width29 ft (8.8 m)
Roadway width25 ft (7.6 m)
Vertical clearance over deckUnrestricted

Traffic and service

Average daily traffic151 (2020)
Projected traffic171 by 2025
Trucks15%
Lanes on structure2
Traffic directionTwo-way traffic
CarriesHighway
CrossesWaterway
Detour if closed26.1 mi (42 km)
TollOn a free road
National Highway SystemNo

Ownership and planned work

OwnerCounty Highway Agency
Maintained byCounty Highway Agency
Historic statusNot eligible for the National Register of Historic Places
Work proposedNone recorded
Estimated improvement cost—
NavigationNo navigation control on waterway

Frequently asked questions

When was Bakeoven RD over Bakeoven Creek built?

It was built in 1952, making it 73 years old in 2025.

What condition is Bakeoven RD over Bakeoven Creek in?

The National Bridge Inventory rates it in good condition. All primary components (deck, superstructure, substructure, or culvert) are rated 7 or higher. No significant problems were noted. The last reported inspection was in August 2024.

How much traffic does Bakeoven RD over Bakeoven Creek carry?

About 151 vehicles per day (2020 count), of which roughly 15% are trucks.

How long is Bakeoven RD over Bakeoven Creek?

The structure is 100 ft (30.5 m) long with a longest span of 40 ft (12.2 m) and a deck 29 ft wide.

Who owns Bakeoven RD over Bakeoven Creek?

It is owned by the County Highway Agency.