US Bridges

HWY 3 over Riverside Canyon

FairPosted for load

Multnomah County, Oregon · 0.04 MI N Riverwood Road · Structure no. 01185A003 00400

Built
1926
99 years old, rebuilt 1971
Condition
Fair
inspected December 2023
Type
Tee Beam
Concrete Continuous
Length
655 ft
5 main spans
Daily traffic
14,839
2022 count
Owner
State
State Highway Agency

About this bridge

HWY 3 over Riverside Canyon is a concrete continuous tee beam carrying HWY 3 over Riverside Canyon in Multnomah County, Oregon. It was built in 1926 and reconstructed in 1971, so it is 99 years old, older than the Oregon average of 49.9 years.

The most recent inspection reported to the Federal Highway Administration rates it in fair condition with a lowest component rating of 6 out of 9. The lowest-rated primary component is rated 5 or 6. Minor deterioration is present but the structure is sound. Its operating status is: posted for other load-capacity restriction.

It carries about 14,839 vehicles a day, roughly 1% of them trucks, projected to reach 16,800 by 2042. The structure is 655 ft (199.7 m) long and 8 ft wide. If it were closed, the detour would be 1.2 mi (2 km).

CarriesHWY 3
CrossesRiverside Canyon
Location0.04 MI N Riverwood Road
RouteState Highway 43
StateOregon
Coordinates45.44771, -122.6575
Functional classUrban Minor Arterial

Condition and inspection

Fair

The lowest-rated primary component is rated 5 or 6. Minor deterioration is present but the structure is sound.

ComponentRatingMeaning
Deck6 SatisfactoryStructural elements show some minor deterioration.
Superstructure6 SatisfactoryStructural elements show some minor deterioration.
Substructure6 SatisfactoryStructural elements show some minor deterioration.
Last inspectionDecember 2023
Inspection intervalevery 24 months
Operating statusPosted for other load-capacity restriction
ScourBridge not over waterway
Structural evaluation3: Basically intolerable, requiring high priority of corrective action
Deck geometry6: Equal to present minimum criteria
Approach roadway alignment8: Equal to present desirable criteria
Operating rating21.4 US tons
Inventory rating16.8 US tons

Structure

Structure typeTee Beam
MaterialConcrete Continuous
DeckConcrete, precast panels
Main spans5 (+11 approach)
Design loadH 15
Structure length655 ft (199.7 m)
Longest span48 ft (14.6 m)
Deck width8 ft (2.4 m)
Roadway width51 ft (15.6 m)
Vertical clearance over deckUnrestricted

Traffic and service

Average daily traffic14,839 (2022)
Projected traffic16,800 by 2042
Trucks1%
Lanes on structure3
Traffic directionTwo-way traffic
CarriesHighway
CrossesOther
Detour if closed1.2 mi (2 km)
TollOn a free road
National Highway SystemNo

Ownership and planned work

OwnerState Highway Agency
Maintained byState Highway Agency
Historic statusNot eligible for the National Register of Historic Places
Work proposedNone recorded
Estimated improvement cost—
NavigationNo navigation control on waterway

Frequently asked questions

When was HWY 3 over Riverside Canyon built?

It was built in 1926, making it 99 years old in 2025. It was reconstructed in 1971.

What condition is HWY 3 over Riverside Canyon in?

The National Bridge Inventory rates it in fair condition. The lowest-rated primary component is rated 5 or 6. Minor deterioration is present but the structure is sound. The last reported inspection was in December 2023.

How much traffic does HWY 3 over Riverside Canyon carry?

About 14,839 vehicles per day (2022 count), of which roughly 1% are trucks.

How long is HWY 3 over Riverside Canyon?

The structure is 655 ft (199.7 m) long with a longest span of 48 ft (14.6 m) and a deck 8 ft wide.

Who owns HWY 3 over Riverside Canyon?

It is owned by the State Highway Agency.