US Bridges

HWY 225 over Oxing HWY 001 (30th Ave)

Good

Lane County, Oregon · 02.3 MI S HWY 015 JCT · Structure no. 08697 225 00225

Built
1960
65 years old
Condition
Good
inspected March 2023
Type
Stringer/Multi-beam or Girder
Prestressed Concrete
Length
232 ft
4 main spans
Daily traffic
11,137
2022 count
Owner
State
State Highway Agency

About this bridge

HWY 225 over Oxing HWY 001 (30th Ave) is a prestressed concrete stringer/multi-beam or girder carrying HWY 225 over Oxing HWY 001 (30th Ave) in Lane County, Oregon. It was built in 1960, so it is 65 years old, older than the Oregon average of 49.9 years.

The most recent inspection reported to the Federal Highway Administration rates it in good condition with a lowest component rating of 7 out of 9. All primary components (deck, superstructure, substructure, or culvert) are rated 7 or higher. No significant problems were noted.

It carries about 11,137 vehicles a day, roughly 7% of them trucks, projected to reach 12,200 by 2042. The structure is 232 ft (70.7 m) long and 35 ft wide. If it were closed, the detour would be 1.9 mi (3 km).

Location

Open in Google Maps
CarriesHWY 225
CrossesOxing HWY 001 (30th Ave)
Location02.3 MI S HWY 015 JCT
RouteState Highway 225
CountyLane County
StateOregon
Coordinates44.0137, -123.02342
Functional classUrban Minor Arterial

Condition and inspection

Good

All primary components (deck, superstructure, substructure, or culvert) are rated 7 or higher. No significant problems were noted.

ComponentRatingMeaning
Deck7 GoodSome minor problems.
Superstructure7 GoodSome minor problems.
Substructure7 GoodSome minor problems.
Last inspectionMarch 2023
Inspection intervalevery 24 months
Operating statusOpen, no restriction
ScourBridge not over waterway
Structural evaluation4: Meets minimum tolerable limits to be left in place as is
Deck geometry4: Meets minimum tolerable limits to be left in place as is
Approach roadway alignment8: Equal to present desirable criteria
Operating rating25 US tons
Inventory rating19.3 US tons

Structure

Structure typeStringer/Multi-beam or Girder
MaterialPrestressed Concrete
DeckConcrete, cast-in-place
Main spans4
Design loadHS 20
Structure length232 ft (70.7 m)
Longest span64 ft (19.5 m)
Deck width35 ft (10.6 m)
Roadway width30 ft (9.1 m)
Vertical clearance over deckUnrestricted

Traffic and service

Average daily traffic11,137 (2022)
Projected traffic12,200 by 2042
Trucks7%
Lanes on structure2
Traffic directionTwo-way traffic
CarriesHighway
CrossesHighway
Detour if closed1.9 mi (3 km)
TollOn a free road
National Highway SystemNo

Ownership and planned work

OwnerState Highway Agency
Maintained byState Highway Agency
Historic statusNot eligible for the National Register of Historic Places
Work proposedNone recorded
Estimated improvement cost—
NavigationNot applicable (no waterway)

Frequently asked questions

When was HWY 225 over Oxing HWY 001 (30th Ave) built?

It was built in 1960, making it 65 years old in 2025.

What condition is HWY 225 over Oxing HWY 001 (30th Ave) in?

The National Bridge Inventory rates it in good condition. All primary components (deck, superstructure, substructure, or culvert) are rated 7 or higher. No significant problems were noted. The last reported inspection was in March 2023.

How much traffic does HWY 225 over Oxing HWY 001 (30th Ave) carry?

About 11,137 vehicles per day (2022 count), of which roughly 7% are trucks.

How long is HWY 225 over Oxing HWY 001 (30th Ave)?

The structure is 232 ft (70.7 m) long with a longest span of 64 ft (19.5 m) and a deck 35 ft wide.

Who owns HWY 225 over Oxing HWY 001 (30th Ave)?

It is owned by the State Highway Agency.