US Bridges

Tiller-Trail HWY over S.Umpqua River

Fair

Douglas County, Oregon · 0.3 MI S of Tiller Po · Structure no. 19C477 1 2652

Built
1990
35 years old
Condition
Fair
inspected June 2023
Type
Tee Beam
Prestressed Concrete
Length
377 ft
3 main spans
Daily traffic
1,160
2020 count
Owner
County
County Highway Agency

About this bridge

Tiller-Trail HWY over S.Umpqua River is a prestressed concrete tee beam carrying Tiller-Trail HWY over S.Umpqua River in Douglas County, Oregon. It was built in 1990, so it is 35 years old, younger than the Oregon average of 49.9 years.

The most recent inspection reported to the Federal Highway Administration rates it in fair condition with a lowest component rating of 6 out of 9. The lowest-rated primary component is rated 5 or 6. Minor deterioration is present but the structure is sound.

It carries about 1,160 vehicles a day, roughly 10% of them trucks, projected to reach 1,310 by 2025. The structure is 377 ft (114.9 m) long and 43 ft wide. If it were closed, the detour would be 123.7 mi (199 km).

CarriesTiller-Trail HWY
CrossesS.Umpqua River
Location0.3 MI S of Tiller Po
RouteCounty Highway A0410
StateOregon
Coordinates42.92709, -122.95121
Functional classRural Major Collector

Condition and inspection

Fair

The lowest-rated primary component is rated 5 or 6. Minor deterioration is present but the structure is sound.

ComponentRatingMeaning
Deck7 GoodSome minor problems.
Superstructure7 GoodSome minor problems.
Substructure6 SatisfactoryStructural elements show some minor deterioration.
Channel and channel protection5 FairAll primary structural elements are sound but may have minor section loss, cracking, spalling or scour.
Last inspectionJune 2023
Inspection intervalevery 24 months
Operating statusOpen, no restriction
ScourFoundations stable; action required to protect exposed foundations
Structural evaluation6: Equal to present minimum criteria
Deck geometry6: Equal to present minimum criteria
Waterway adequacy8: Equal to present desirable criteria
Approach roadway alignment8: Equal to present desirable criteria
Operating rating37.8 US tons
Inventory rating29.3 US tons

Structure

Structure typeTee Beam
MaterialPrestressed Concrete
DeckOther
Main spans3
Design loadHS 25 or greater
Structure length377 ft (114.9 m)
Longest span135 ft (41.1 m)
Deck width43 ft (13.2 m)
Roadway width36 ft (11 m)
Vertical clearance over deckUnrestricted

Traffic and service

Average daily traffic1,160 (2020)
Projected traffic1,310 by 2025
Trucks10%
Lanes on structure2
Traffic directionTwo-way traffic
CarriesHighway and pedestrian
CrossesWaterway
Detour if closed123.7 mi (199 km)
TollOn a free road
National Highway SystemNo

Ownership and planned work

OwnerCounty Highway Agency
Maintained byCounty Highway Agency
Historic statusNot eligible for the National Register of Historic Places
Work proposedNone recorded
Estimated improvement cost—
NavigationNo navigation control on waterway

Frequently asked questions

When was Tiller-Trail HWY over S.Umpqua River built?

It was built in 1990, making it 35 years old in 2025.

What condition is Tiller-Trail HWY over S.Umpqua River in?

The National Bridge Inventory rates it in fair condition. The lowest-rated primary component is rated 5 or 6. Minor deterioration is present but the structure is sound. The last reported inspection was in June 2023.

How much traffic does Tiller-Trail HWY over S.Umpqua River carry?

About 1,160 vehicles per day (2020 count), of which roughly 10% are trucks.

How long is Tiller-Trail HWY over S.Umpqua River?

The structure is 377 ft (114.9 m) long with a longest span of 135 ft (41.1 m) and a deck 43 ft wide.

Who owns Tiller-Trail HWY over S.Umpqua River?

It is owned by the County Highway Agency.