US Bridges

Canby Marquam HWY over Bear Creek

Good

Clackamas County, Oregon · 01.2 MI N of HWY 211 · Structure no. 24051 000 00119

Built
2022
3 years old
Condition
Good
inspected April 2023
Type
Slab
Prestressed Concrete
Length
85 ft
1 main span
Daily traffic
1,802
2020 count
Owner
County
County Highway Agency

About this bridge

Canby Marquam HWY over Bear Creek is a prestressed concrete slab carrying Canby Marquam HWY over Bear Creek in Clackamas County, Oregon. It was built in 2022, so it is 3 years old, younger than the Oregon average of 49.9 years.

The most recent inspection reported to the Federal Highway Administration rates it in good condition with a lowest component rating of 8 out of 9. All primary components (deck, superstructure, substructure, or culvert) are rated 7 or higher. No significant problems were noted.

It carries about 1,802 vehicles a day, roughly 16% of them trucks, projected to reach 1,827 by 2025. The structure is 85 ft (25.9 m) long and 40 ft wide. If it were closed, the detour would be 5 mi (8 km).

CarriesCanby Marquam HWY
CrossesBear Creek
Location01.2 MI N of HWY 211
RouteCounty Highway 0A882
StateOregon
Coordinates45.16815, -122.68029
Functional classRural Minor Arterial

Condition and inspection

Good

All primary components (deck, superstructure, substructure, or culvert) are rated 7 or higher. No significant problems were noted.

ComponentRatingMeaning
Deck8 Very GoodNo problems noted.
Superstructure8 Very GoodNo problems noted.
Substructure8 Very GoodNo problems noted.
Channel and channel protection8 Very GoodNo problems noted.
Last inspectionApril 2023
Inspection intervalevery 24 months
Operating statusOpen, no restriction
ScourFoundations stable; scour within limits of footing or piles
Structural evaluation8: Equal to present desirable criteria
Deck geometry6: Equal to present minimum criteria
Waterway adequacy8: Equal to present desirable criteria
Approach roadway alignment8: Equal to present desirable criteria
Operating rating61.1 US tons
Inventory rating47.2 US tons

Structure

Structure typeSlab
MaterialPrestressed Concrete
DeckConcrete, precast panels
Main spans1
Design loadHL 93
Structure length85 ft (25.9 m)
Longest span83 ft (25.3 m)
Deck width40 ft (12.2 m)
Roadway width37 ft (11.3 m)
Vertical clearance over deckUnrestricted

Traffic and service

Average daily traffic1,802 (2020)
Projected traffic1,827 by 2025
Trucks16%
Lanes on structure2
Traffic directionTwo-way traffic
CarriesHighway
CrossesWaterway
Detour if closed5 mi (8 km)
TollOn a free road
National Highway SystemNo

Ownership and planned work

OwnerCounty Highway Agency
Maintained byCounty Highway Agency
Historic statusHistorical significance not determinable at this time
Work proposedNone recorded
Estimated improvement cost—
NavigationNo navigation control on waterway

Frequently asked questions

When was Canby Marquam HWY over Bear Creek built?

It was built in 2022, making it 3 years old in 2025.

What condition is Canby Marquam HWY over Bear Creek in?

The National Bridge Inventory rates it in good condition. All primary components (deck, superstructure, substructure, or culvert) are rated 7 or higher. No significant problems were noted. The last reported inspection was in April 2023.

How much traffic does Canby Marquam HWY over Bear Creek carry?

About 1,802 vehicles per day (2020 count), of which roughly 16% are trucks.

How long is Canby Marquam HWY over Bear Creek?

The structure is 85 ft (25.9 m) long with a longest span of 83 ft (25.3 m) and a deck 40 ft wide.

Who owns Canby Marquam HWY over Bear Creek?

It is owned by the County Highway Agency.