US Bridges

Arrah Wanna Blvd over Salmon River

Good

Clackamas County, Oregon · 0.9 MI S of HWY 26 · Structure no. 20414 003 0092

Built
2013
12 years old
Condition
Good
inspected July 2024
Type
Tee Beam
Prestressed Concrete
Length
142 ft
1 main span
Daily traffic
206
2020 count
Owner
County
County Highway Agency

About this bridge

Arrah Wanna Blvd over Salmon River is a prestressed concrete tee beam carrying Arrah Wanna Blvd over Salmon River in Clackamas County, Oregon. It was built in 2013, so it is 12 years old, younger than the Oregon average of 49.9 years.

The most recent inspection reported to the Federal Highway Administration rates it in good condition with a lowest component rating of 7 out of 9. All primary components (deck, superstructure, substructure, or culvert) are rated 7 or higher. No significant problems were noted.

It carries about 206 vehicles a day, roughly 6% of them trucks, projected to reach 211 by 2025. The structure is 142 ft (43.3 m) long and 31 ft wide. If it were closed, the detour would be 123.7 mi (199 km).

CarriesArrah Wanna Blvd
CrossesSalmon River
Location0.9 MI S of HWY 26
RouteCounty Highway C0706
StateOregon
Coordinates45.33854, -121.97366
Functional classRural Minor Collector

Condition and inspection

Good

All primary components (deck, superstructure, substructure, or culvert) are rated 7 or higher. No significant problems were noted.

ComponentRatingMeaning
Deck7 GoodSome minor problems.
Superstructure7 GoodSome minor problems.
Substructure7 GoodSome minor problems.
Channel and channel protection8 Very GoodNo problems noted.
Last inspectionJuly 2024
Inspection intervalevery 24 months
Operating statusOpen, no restriction
ScourFoundations stable; scour within limits of footing or piles
Structural evaluation7: Better than present minimum criteria
Deck geometry5: Somewhat better than minimum adequacy to tolerate being left in place as is
Waterway adequacy7: Better than present minimum criteria
Approach roadway alignment6: Equal to present minimum criteria
Operating rating56.8 US tons
Inventory rating44 US tons

Structure

Structure typeTee Beam
MaterialPrestressed Concrete
DeckConcrete, precast panels
Main spans1
Design loadHL 93
Structure length142 ft (43.3 m)
Longest span140 ft (42.8 m)
Deck width31 ft (9.3 m)
Roadway width27 ft (8.2 m)
Vertical clearance over deckUnrestricted

Traffic and service

Average daily traffic206 (2020)
Projected traffic211 by 2025
Trucks6%
Lanes on structure2
Traffic directionTwo-way traffic
CarriesHighway
CrossesWaterway
Detour if closed123.7 mi (199 km)
TollOn a free road
National Highway SystemNo

Ownership and planned work

OwnerCounty Highway Agency
Maintained byCounty Highway Agency
Historic statusNot eligible for the National Register of Historic Places
Work proposedNone recorded
Estimated improvement cost—
NavigationNo navigation control on waterway

Frequently asked questions

When was Arrah Wanna Blvd over Salmon River built?

It was built in 2013, making it 12 years old in 2025.

What condition is Arrah Wanna Blvd over Salmon River in?

The National Bridge Inventory rates it in good condition. All primary components (deck, superstructure, substructure, or culvert) are rated 7 or higher. No significant problems were noted. The last reported inspection was in July 2024.

How much traffic does Arrah Wanna Blvd over Salmon River carry?

About 206 vehicles per day (2020 count), of which roughly 6% are trucks.

How long is Arrah Wanna Blvd over Salmon River?

The structure is 142 ft (43.3 m) long with a longest span of 140 ft (42.8 m) and a deck 31 ft wide.

Who owns Arrah Wanna Blvd over Salmon River?

It is owned by the County Highway Agency.