US Bridges

Pleasant Hill RD over Bandy Creek

Good

Latimer County, Oklahoma · 0.7 E 0.7 S Wilburton · Structure no. 297090000000000

Built
2010
15 years old
Condition
Good
inspected August 2024
Type
Tee Beam
Prestressed Concrete
Length
126 ft
3 main spans
Daily traffic
200
2022 count
Owner
County
County Highway Agency

About this bridge

Pleasant Hill RD over Bandy Creek is a prestressed concrete tee beam carrying Pleasant Hill RD over Bandy Creek in Latimer County, Oklahoma. It was built in 2010, so it is 15 years old, younger than the Oklahoma average of 47.8 years.

The most recent inspection reported to the Federal Highway Administration rates it in good condition with a lowest component rating of 8 out of 9. All primary components (deck, superstructure, substructure, or culvert) are rated 7 or higher. No significant problems were noted.

It carries about 200 vehicles a day, roughly 10% of them trucks, projected to reach 320 by 2042. The structure is 126 ft (38.3 m) long and 28 ft wide. If it were closed, the detour would be 4.3 mi (7 km).

CarriesPleasant Hill RD
CrossesBandy Creek
Location0.7 E 0.7 S Wilburton
RouteCounty Highway N4340
Coordinates34.90889, -95.29667
Functional classRural Local

Condition and inspection

Good

All primary components (deck, superstructure, substructure, or culvert) are rated 7 or higher. No significant problems were noted.

ComponentRatingMeaning
Deck9 ExcellentNo problems noted.
Superstructure9 ExcellentNo problems noted.
Substructure8 Very GoodNo problems noted.
Channel and channel protection8 Very GoodNo problems noted.
Last inspectionAugust 2024
Inspection intervalevery 24 months
Operating statusOpen, no restriction
ScourFoundations stable; scour above top of footing
Structural evaluation7: Better than present minimum criteria
Deck geometry5: Somewhat better than minimum adequacy to tolerate being left in place as is
Waterway adequacy8: Equal to present desirable criteria
Approach roadway alignment8: Equal to present desirable criteria
Operating rating67 US tons
Inventory rating35.1 US tons

Structure

Structure typeTee Beam
MaterialPrestressed Concrete
DeckConcrete, cast-in-place
Main spans3
Design loadHS 20
Structure length126 ft (38.3 m)
Longest span55 ft (16.8 m)
Deck width28 ft (8.5 m)
Roadway width26 ft (8 m)
Vertical clearance over deckUnrestricted

Traffic and service

Average daily traffic200 (2022)
Projected traffic320 by 2042
Trucks10%
Lanes on structure2
Traffic directionTwo-way traffic
CarriesHighway
CrossesWaterway
Detour if closed4.3 mi (7 km)
TollOn a free road
National Highway SystemNo

Ownership and planned work

OwnerCounty Highway Agency
Maintained byCounty Highway Agency
Historic statusNot eligible for the National Register of Historic Places
Work proposedNone recorded
Estimated improvement cost—
NavigationNo navigation control on waterway

Frequently asked questions

When was Pleasant Hill RD over Bandy Creek built?

It was built in 2010, making it 15 years old in 2025.

What condition is Pleasant Hill RD over Bandy Creek in?

The National Bridge Inventory rates it in good condition. All primary components (deck, superstructure, substructure, or culvert) are rated 7 or higher. No significant problems were noted. The last reported inspection was in August 2024.

How much traffic does Pleasant Hill RD over Bandy Creek carry?

About 200 vehicles per day (2022 count), of which roughly 10% are trucks.

How long is Pleasant Hill RD over Bandy Creek?

The structure is 126 ft (38.3 m) long with a longest span of 55 ft (16.8 m) and a deck 28 ft wide.

Who owns Pleasant Hill RD over Bandy Creek?

It is owned by the County Highway Agency.