US Bridges

Ingleside Drive over Brandywine Creek

Good

Summit County, Ohio · 200 Ft N of Boston Mills · Structure no. 7767812

Built
2022
3 years old
Condition
Good
inspected April 2024
Type
Slab
Concrete
Length
40 ft
1 main span
Daily traffic
5,568
2015 count
Owner
City
City or Municipal Highway Agency

About this bridge

Ingleside Drive over Brandywine Creek is a concrete slab carrying Ingleside Drive over Brandywine Creek in Summit County, Ohio. It was built in 2022, so it is 3 years old, younger than the Ohio average of 47.3 years.

The most recent inspection reported to the Federal Highway Administration rates it in good condition with a lowest component rating of 8 out of 9. All primary components (deck, superstructure, substructure, or culvert) are rated 7 or higher. No significant problems were noted.

It carries about 5,568 vehicles a day, roughly 5% of them trucks, projected to reach 7,728 by 2035. The structure is 40 ft (12.2 m) long and 33 ft wide. If it were closed, the detour would be 98.8 mi (159 km).

CarriesIngleside Drive
CrossesBrandywine Creek
Location200 Ft N of Boston Mills
RouteCity Street 3419P
StateOhio
Coordinates41.246, -81.4665
Functional classUrban Local

Condition and inspection

Good

All primary components (deck, superstructure, substructure, or culvert) are rated 7 or higher. No significant problems were noted.

ComponentRatingMeaning
Deck8 Very GoodNo problems noted.
Superstructure9 ExcellentNo problems noted.
Substructure9 ExcellentNo problems noted.
Channel and channel protection8 Very GoodNo problems noted.
Last inspectionApril 2024
Inspection intervalevery 12 months
Operating statusOpen, no restriction
ScourFoundations stable; scour above top of footing
Structural evaluation9: Superior to present desirable criteria
Deck geometry2: Basically intolerable, requiring high priority of replacement
Waterway adequacy9: Superior to present desirable criteria
Approach roadway alignment9: Superior to present desirable criteria
Operating rating62.2 US tons
Inventory rating47.8 US tons

Structure

Structure typeSlab
MaterialConcrete
DeckConcrete, cast-in-place
Main spans1
Design loadHL 93
Structure length40 ft (12.2 m)
Longest span38 ft (11.6 m)
Deck width33 ft (10.1 m)
Roadway width25 ft (7.6 m)
Vertical clearance over deckUnrestricted

Traffic and service

Average daily traffic5,568 (2015)
Projected traffic7,728 by 2035
Trucks5%
Lanes on structure2
Traffic directionTwo-way traffic
CarriesHighway
CrossesWaterway
Detour if closed98.8 mi (159 km)
TollOn a free road
National Highway SystemNo

Ownership and planned work

OwnerCity or Municipal Highway Agency
Maintained byCity or Municipal Highway Agency
Historic statusNot eligible for the National Register of Historic Places
Work proposedNone recorded
Estimated improvement cost—
NavigationNot applicable (no waterway)

Frequently asked questions

When was Ingleside Drive over Brandywine Creek built?

It was built in 2022, making it 3 years old in 2025.

What condition is Ingleside Drive over Brandywine Creek in?

The National Bridge Inventory rates it in good condition. All primary components (deck, superstructure, substructure, or culvert) are rated 7 or higher. No significant problems were noted. The last reported inspection was in April 2024.

How much traffic does Ingleside Drive over Brandywine Creek carry?

About 5,568 vehicles per day (2015 count), of which roughly 5% are trucks.

How long is Ingleside Drive over Brandywine Creek?

The structure is 40 ft (12.2 m) long with a longest span of 38 ft (11.6 m) and a deck 33 ft wide.

Who owns Ingleside Drive over Brandywine Creek?

It is owned by the City or Municipal Highway Agency.