US Bridges

Ullman-Hines RD over Rich Fork

Good

Monroe County, Ohio · 100 Ft South of JCT CR 17 · Structure no. 5632610

Built
2016
9 years old
Condition
Good
inspected June 2024
Type
Stringer/Multi-beam or Girder
Steel
Length
29 ft
1 main span
Daily traffic
209
2015 count
Owner
County
County Highway Agency

About this bridge

Ullman-Hines RD over Rich Fork is a steel stringer/multi-beam or girder carrying Ullman-Hines RD over Rich Fork in Monroe County, Ohio. It was built in 2016, so it is 9 years old, younger than the Ohio average of 47.3 years.

The most recent inspection reported to the Federal Highway Administration rates it in good condition with a lowest component rating of 7 out of 9. All primary components (deck, superstructure, substructure, or culvert) are rated 7 or higher. No significant problems were noted.

It carries about 209 vehicles a day, roughly 7% of them trucks, projected to reach 290 by 2035. The structure is 29 ft (8.8 m) long and 20 ft wide. If it were closed, the detour would be 3.1 mi (5 km).

Location

Open in Google Maps
CarriesUllman-Hines RD
CrossesRich Fork
Location100 Ft South of JCT CR 17
RouteCounty Highway C0099
CountyMonroe County
StateOhio
Coordinates39.73108, -81.23257
Functional classRural Local

Condition and inspection

Good

All primary components (deck, superstructure, substructure, or culvert) are rated 7 or higher. No significant problems were noted.

ComponentRatingMeaning
Deck7 GoodSome minor problems.
Superstructure8 Very GoodNo problems noted.
Substructure7 GoodSome minor problems.
Channel and channel protection7 GoodSome minor problems.
Last inspectionJune 2024
Inspection intervalevery 24 months
Operating statusOpen, no restriction
ScourFoundations stable; scour above top of footing
Structural evaluation7: Better than present minimum criteria
Deck geometry3: Basically intolerable, requiring high priority of corrective action
Waterway adequacy8: Equal to present desirable criteria
Approach roadway alignment8: Equal to present desirable criteria
Operating rating61.4 US tons
Inventory rating36.8 US tons

Structure

Structure typeStringer/Multi-beam or Girder
MaterialSteel
DeckCorrugated steel
Main spans1
Design loadHL 93
Structure length29 ft (8.8 m)
Longest span26 ft (7.9 m)
Deck width20 ft (6.1 m)
Roadway width20 ft (6 m)
Vertical clearance over deckUnrestricted

Traffic and service

Average daily traffic209 (2015)
Projected traffic290 by 2035
Trucks7%
Lanes on structure1
Traffic directionOne-lane bridge for two-way traffic
CarriesHighway
CrossesWaterway
Detour if closed3.1 mi (5 km)
TollOn a free road
National Highway SystemNo

Ownership and planned work

OwnerCounty Highway Agency
Maintained byCounty Highway Agency
Historic statusNot eligible for the National Register of Historic Places
Work proposedReplacement because of substandard load-carrying capacity or roadway geometry
Estimated improvement cost$50,000
NavigationNo navigation control on waterway

Frequently asked questions

When was Ullman-Hines RD over Rich Fork built?

It was built in 2016, making it 9 years old in 2025.

What condition is Ullman-Hines RD over Rich Fork in?

The National Bridge Inventory rates it in good condition. All primary components (deck, superstructure, substructure, or culvert) are rated 7 or higher. No significant problems were noted. The last reported inspection was in June 2024.

How much traffic does Ullman-Hines RD over Rich Fork carry?

About 209 vehicles per day (2015 count), of which roughly 7% are trucks.

How long is Ullman-Hines RD over Rich Fork?

The structure is 29 ft (8.8 m) long with a longest span of 26 ft (7.9 m) and a deck 20 ft wide.

Who owns Ullman-Hines RD over Rich Fork?

It is owned by the County Highway Agency.