US Bridges

Licking Valley RD over Brushy Fork

Good

Licking County, Ohio · 0.1 MI S of Grove RD · Structure no. 4536622

Built
1991
34 years old
Condition
Good
inspected July 2024
Type
Stringer/Multi-beam or Girder
Steel Continuous
Length
100 ft
3 main spans
Daily traffic
596
2015 count
Owner
County
County Highway Agency

About this bridge

Licking Valley RD over Brushy Fork is a steel continuous stringer/multi-beam or girder carrying Licking Valley RD over Brushy Fork in Licking County, Ohio. It was built in 1991, so it is 34 years old, younger than the Ohio average of 47.3 years.

The most recent inspection reported to the Federal Highway Administration rates it in good condition with a lowest component rating of 7 out of 9. All primary components (deck, superstructure, substructure, or culvert) are rated 7 or higher. No significant problems were noted.

It carries about 596 vehicles a day, roughly 6% of them trucks, projected to reach 827 by 2035. The structure is 100 ft (30.4 m) long and 30 ft wide.

CarriesLicking Valley RD
CrossesBrushy Fork
Location0.1 MI S of Grove RD
RouteCounty Highway C0668
StateOhio
Coordinates40.11622, -82.23833
Functional classRural Major Collector

Condition and inspection

Good

All primary components (deck, superstructure, substructure, or culvert) are rated 7 or higher. No significant problems were noted.

ComponentRatingMeaning
Deck7 GoodSome minor problems.
Superstructure7 GoodSome minor problems.
Substructure8 Very GoodNo problems noted.
Channel and channel protection7 GoodSome minor problems.
Last inspectionJuly 2024
Inspection intervalevery 24 months
Operating statusOpen, no restriction
ScourFoundations stable; scour above top of footing
Structural evaluation7: Better than present minimum criteria
Deck geometry6: Equal to present minimum criteria
Waterway adequacy9: Superior to present desirable criteria
Approach roadway alignment7: Better than present minimum criteria
Operating rating82.1 US tons
Inventory rating50 US tons

Structure

MaterialSteel Continuous
DeckConcrete, cast-in-place
Main spans3
Design loadHS 20
Structure length100 ft (30.4 m)
Longest span37 ft (11.4 m)
Deck width30 ft (9.1 m)
Roadway width30 ft (9.1 m)
Vertical clearance over deckUnrestricted

Traffic and service

Average daily traffic596 (2015)
Projected traffic827 by 2035
Trucks6%
Lanes on structure2
Traffic directionTwo-way traffic
CarriesHighway
CrossesWaterway
Detour if closed—
TollOn a free road
National Highway SystemNo

Ownership and planned work

OwnerCounty Highway Agency
Maintained byCounty Highway Agency
Historic statusNot eligible for the National Register of Historic Places
Work proposedNone recorded
Estimated improvement cost—
NavigationNo navigation control on waterway

Frequently asked questions

When was Licking Valley RD over Brushy Fork built?

It was built in 1991, making it 34 years old in 2025.

What condition is Licking Valley RD over Brushy Fork in?

The National Bridge Inventory rates it in good condition. All primary components (deck, superstructure, substructure, or culvert) are rated 7 or higher. No significant problems were noted. The last reported inspection was in July 2024.

How much traffic does Licking Valley RD over Brushy Fork carry?

About 596 vehicles per day (2015 count), of which roughly 6% are trucks.

How long is Licking Valley RD over Brushy Fork?

The structure is 100 ft (30.4 m) long with a longest span of 37 ft (11.4 m) and a deck 30 ft wide.

Who owns Licking Valley RD over Brushy Fork?

It is owned by the County Highway Agency.