Saw Mill RD #244 over Baker Fork
GoodHighland County, Ohio · 1.5 Miles West of S.R.124 · Structure no. 3631648
- Built
- 1998
- 27 years old
- Condition
- Good
- inspected March 2024
- Type
- Box Beam or Girders - Multiple
- Prestressed Concrete Continuous
- Length
- 81 ft
- 3 main spans
- Daily traffic
- 96
- 2015 count
- Owner
- County
- County Highway Agency
About this bridge
Saw Mill RD #244 over Baker Fork is a prestressed concrete continuous box beam or girders - multiple carrying Saw Mill RD #244 over Baker Fork in Highland County, Ohio. It was built in 1998, so it is 27 years old, younger than the Ohio average of 47.3 years.
The most recent inspection reported to the Federal Highway Administration rates it in good condition with a lowest component rating of 8 out of 9. All primary components (deck, superstructure, substructure, or culvert) are rated 7 or higher. No significant problems were noted.
It carries about 96 vehicles a day, roughly 7% of them trucks, projected to reach 133 by 2035. The structure is 81 ft (24.7 m) long and 24 ft wide. If it were closed, the detour would be 3.1 mi (5 km).
Location
Open in Google MapsCondition and inspection
All primary components (deck, superstructure, substructure, or culvert) are rated 7 or higher. No significant problems were noted.
| Component | Rating | Meaning |
|---|---|---|
| Deck | 8 Very Good | No problems noted. |
| Superstructure | 8 Very Good | No problems noted. |
| Substructure | 8 Very Good | No problems noted. |
| Channel and channel protection | 8 Very Good | No problems noted. |
Structure
Traffic and service
Ownership and planned work
Frequently asked questions
When was Saw Mill RD #244 over Baker Fork built?
It was built in 1998, making it 27 years old in 2025.
What condition is Saw Mill RD #244 over Baker Fork in?
The National Bridge Inventory rates it in good condition. All primary components (deck, superstructure, substructure, or culvert) are rated 7 or higher. No significant problems were noted. The last reported inspection was in March 2024.
How much traffic does Saw Mill RD #244 over Baker Fork carry?
About 96 vehicles per day (2015 count), of which roughly 7% are trucks.
How long is Saw Mill RD #244 over Baker Fork?
The structure is 81 ft (24.7 m) long with a longest span of 27 ft (8.2 m) and a deck 24 ft wide.
Who owns Saw Mill RD #244 over Baker Fork?
It is owned by the County Highway Agency.