US Bridges

Fort Hill RD #256 over Baker Fork

Fair

Highland County, Ohio · South of CR 76 · Structure no. 3631532

Built
1981
44 years old, rebuilt 2001
Condition
Fair
inspected March 2024
Type
Stringer/Multi-beam or Girder
Steel
Length
60 ft
1 main span
Daily traffic
324
2015 count
Owner
County
County Highway Agency

About this bridge

Fort Hill RD #256 over Baker Fork is a steel stringer/multi-beam or girder carrying Fort Hill RD #256 over Baker Fork in Highland County, Ohio. It was built in 1981 and reconstructed in 2001, so it is 44 years old, younger than the Ohio average of 47.3 years.

The most recent inspection reported to the Federal Highway Administration rates it in fair condition with a lowest component rating of 6 out of 9. The lowest-rated primary component is rated 5 or 6. Minor deterioration is present but the structure is sound.

It carries about 324 vehicles a day, roughly 7% of them trucks, projected to reach 450 by 2035. The structure is 60 ft (18.3 m) long and 23 ft wide. If it were closed, the detour would be 8.7 mi (14 km).

CarriesFort Hill RD #256
CrossesBaker Fork
LocationSouth of CR 76
RouteCounty Highway T0256
StateOhio
Coordinates39.12469, -83.39656
Functional classRural Local

Condition and inspection

Fair

The lowest-rated primary component is rated 5 or 6. Minor deterioration is present but the structure is sound.

ComponentRatingMeaning
Deck7 GoodSome minor problems.
Superstructure6 SatisfactoryStructural elements show some minor deterioration.
Substructure8 Very GoodNo problems noted.
Channel and channel protection7 GoodSome minor problems.
Last inspectionMarch 2024
Inspection intervalevery 12 months
Operating statusOpen, no restriction
ScourFoundations stable; scour above top of footing
Structural evaluation6: Equal to present minimum criteria
Deck geometry4: Meets minimum tolerable limits to be left in place as is
Waterway adequacy6: Equal to present minimum criteria
Approach roadway alignment6: Equal to present minimum criteria
Operating rating44 US tons
Inventory rating26.5 US tons

Structure

MaterialSteel
DeckConcrete, cast-in-place
Main spans1
Design loadHS 15
Structure length60 ft (18.3 m)
Longest span59 ft (18 m)
Deck width23 ft (6.9 m)
Roadway width22 ft (6.7 m)
Vertical clearance over deckUnrestricted

Traffic and service

Average daily traffic324 (2015)
Projected traffic450 by 2035
Trucks7%
Lanes on structure2
Traffic directionTwo-way traffic
CarriesHighway
CrossesWaterway
Detour if closed8.7 mi (14 km)
TollOn a free road
National Highway SystemNo

Ownership and planned work

OwnerCounty Highway Agency
Maintained byCounty Highway Agency
Historic statusNot eligible for the National Register of Historic Places
Work proposedNone recorded
Estimated improvement cost—
NavigationNo navigation control on waterway

Frequently asked questions

When was Fort Hill RD #256 over Baker Fork built?

It was built in 1981, making it 44 years old in 2025. It was reconstructed in 2001.

What condition is Fort Hill RD #256 over Baker Fork in?

The National Bridge Inventory rates it in fair condition. The lowest-rated primary component is rated 5 or 6. Minor deterioration is present but the structure is sound. The last reported inspection was in March 2024.

How much traffic does Fort Hill RD #256 over Baker Fork carry?

About 324 vehicles per day (2015 count), of which roughly 7% are trucks.

How long is Fort Hill RD #256 over Baker Fork?

The structure is 60 ft (18.3 m) long with a longest span of 59 ft (18 m) and a deck 23 ft wide.

Who owns Fort Hill RD #256 over Baker Fork?

It is owned by the County Highway Agency.